16" Golden Motor wheels overstock sale: only $50 each

[d3robotics]

I have a set of 16" 800W BLDC (brushless DC) hub motor wheels (and matching controllers) to sell for just $50 each (including the controller). This is less than one quarter the original price! I have 10 wheels+controllers to sell. I'm located in the Vancouver, BC area.

They are PW16C Golden Motor units. These are very quiet running reliable motors. The controllers are speed limited to 30 km/hr, include regenerative braking, and forwards and reverse operation. Great for electric motorbikes or electric carts.

Wheel:


Controller:


Mechanical drawing
Controller wiring
Performance specs

These were imported from Golden Motor for a robotics prototyping project that was later cancelled. They are totally unused and have been kept in warm dry storage.

Pick up or shipment costs are at your expense. Shipping weight is 30 lbs (14 Kg). Payment via paypal.
The motors are provided without warranty, and without technical support.

For serious enquiries only, please email me at jcwilson@ieee.org

[E-racer]

grrrr must resist... I've been wanting to make a doctor evil chair for so long.

[Brentis]

I have a set of 16" 800W BLDC (brushless DC) hub motor wheels (and matching controllers) to sell for just $50 each (including the controller). This is less than one quarter the original price! I have 10 wheels+controllers to sell. I'm located in the Vancouver, BC area.

They are PW16C Golden Motor units. These are very quiet running reliable motors. The controllers are speed limited to 30 km/hr, include regenerative braking, and forwards and reverse operation. Great for electric motorbikes or electric carts.

Wheel:


Controller:


Mechanical drawing
Controller wiring
Performance specs

These were imported from Golden Motor for a robotics prototyping project that was later cancelled. They are totally unused and have been kept in warm dry storage.

Pick up or shipment costs are at your expense. Shipping weight is 30 lbs (14 Kg). Payment via paypal.
The motors are provided without warranty, and without technical support.

For serious enquiries only, please email me at jcwilson@ieee.org

I am interested in 2. I have a crazy slow speed(10-25kph) project in mind.
I need to transfer some funds to PayPal takes a week or two with my bank. I'll send ya a msg.
A couple of ?'s
1. Tire included?
2. This appears from the pic. to be the 12" motor. Is 16"the diameter tire included? or is this a 16" bicycle tire size hub?
(I tried to open your links, but it slowed/confused my computer. )

Thanks
Ill be in touch.

[d3robotics]

The tires are included. They will likely need inflation because they have been sitting in storage for a while.

16" is the approximate diameter of the entire wheel including the tire.

Do shoot me an email when you are ready to go ahead with a purchase, and be sure to include address info (postal code at a minimum) so that I can work out shipping cost (unless you are local and planning to pick up). It's first come first served

[def215]

damn im so tempted to jump on this deal. but im sure shipping to the US would kill me though.

[bigmoose]

There is a group of guys building a motorized chair for a gent that cannot walk on this thread http://endless-sphere.com/forums/viewtopic.php?f=3&t=37601 I'll cross post this thread there.

It sure would be nice if they could use these, if they got first "dibbs" since the price is so good, and they look brand new!

[johnrobholmes]

I'll take two, email sent. I would be happy to pass these up if some wheelchair bound guys need them more though.

[d3robotics]

There is a group of guys building a motorized chair for a gent that cannot walk on this thread http://endless-sphere.com/forums/viewtopic.php?f=3&t=37601 I'll cross post this thread there.

It sure would be nice if they could use these, if they got first "dibbs" since the price is so good, and they look brand new!

An interesting project, and I'd be happy to give this priority, although I think you should look carefully at the specs to see if this is what you want. Dual electric wheels will present some control challenges, as we found out when implementing our prototype for a robotic golf ball picker.

If you are still interested, email me directly (jcwilson@ieee.org) with your postal / zip code so I can estimate shipping cost for you.

[Oldsarge]

Hello!

I'm the guy doing the build on Project Freedom over at AtomicZombie. I just received this link on the motors... PM sent, but don't know if it went through, it shows the messages in my "Outbox" and nothing in the Sent folder. Anyway, please contact me... I'm interested in the motors/controllers. Let me know how many you have left. I'm in Olympia, WA and maybe we could even meet if I drove up next Saturday and save shipping!

Please email me at oldsarge@gmail.com or you can call me directly any time at 360-789-9615 We are really looking forward to getting this project off the ground, and these would really be helpful in stretching the budget!

Oldsarge.

[bigmoose]

old sarge our system shows it in the outbox until it is read. Then it moves to the sent message folder.

Give the gent an email on the email he posted above. Don't know if he added that after you posted however in an edit.

[d3robotics]

Thanks bigmoose, we did get connected.

[Erikjan]

How much is shipping to Holland?

[dutchlincoln]

ze zijn al verkocht, ik was er redelijk vlot bij Erik... Ik viste ook achter het net....
Is het nog gelukt met de 5e accu plaatsen? Geen prius-cellen meer in serie zetten eh...

greets.