The time has come to retire my Bafang BPM code 12 Rear Motor (Sensorless only)
This is a geared rated 350-750w rated rear motor.
Its laced in a double walled 700c wheel with DT Swiss 12 guage spokes I believe. The rim has seen better days though and from my last bit crash it has a flat spot I cannot get out.
The motor has been through alot including a winter in the UK. I have put roughly 5000 miles on the little beast.
I've over volted it and put it through its paces.
The rear motor is 250 rpm @ 36v nominal. I've predominantly ran it at 44v 23amp most of its life. However I have pushed it to 66v 30amp. The windings are perfect if a little mucky.
Its had its bearings replaced with some decent industrial UK brought ones. There very free running. Please see the below thread for pictures.http://www.pedelecs.co.uk/forum/electri ... g-hub.html
All gears are intact and clutch works but its not silent. Sometimes there's some graunching. I currently use this on my bike and it works exactly as it should. But by no means is it perfect.
I AM SELLING IT AS SPARES OR REPAIR.
The Price Reflects this.
It would make an great off road build where silence isn't a problem or if you want to test it to destruction.
Heres a video of me on my commute @ 44vhttp://www.pedelecs.co.uk/forum/electri ... e-2-a.html
If anyone has the same motor it would make a good spares as the gears and clutch and bearings are still worth what I'm selling it for.
I'm asking £50 laced and P&P
£45 Motor only and P&P (postage will be cheaper though)
I would swap for a perfectly working Rear Bafang 250w motor Or other rear geared motor.
Let me know if this is of any use / interest to you.
Based in Birmingham for collection.