Ebike motor/controller hall/phase/throttle tester $29

Place for dealers to post items for sale.

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby alsmith » Tue Aug 02, 2011 10:14 am

-Mine was the same- it worked straight out of the box. But it's a chinese made battery with no expiry date, usually no capacity rating is shown on the battery or the makers site, so first stop is the bin- the only batteries that I've had leakage problems with for many years now are this kind.

This tester is probably in a toolbox most of the time so there's a chance of leakage damage (Like everyone I know I don't remove batteries from equipment not used for long periods despite manufacturers small print warnings in instruction manuals) so the cheap battery goes and a better brand name one used.
User avatar
alsmith
10 kW
10 kW
 
Posts: 996
Joined: Fri Dec 03, 2010 7:25 pm
Location: Northumberland, UK

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby ohzee » Tue Aug 23, 2011 7:26 pm

just paid for one look forward to it - nice product nice price thanks.
User avatar
ohzee
1 MW
1 MW
 
Posts: 1751
Joined: Wed Jul 20, 2011 1:13 pm
Location: Columbus Ohio USA

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby Lyen » Tue Aug 23, 2011 7:30 pm

Hi Ohzee,

Thank you for your purchase. I have just shipped your tester at the local post office. The tracking number has been placed on your PayPal account.

Best Regards,
Lyen

ohzee wrote:just paid for one look forward to it - nice product nice price thanks.
Items For Sale
Please sign up here and donate your marrow to save life.
User avatar
Lyen
10 kW
10 kW
 
Posts: 775
Joined: Fri Aug 17, 2007 1:26 am
Location: San Francisco, California, USA

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby Floont » Wed Aug 31, 2011 6:54 am


I just purchased a controller tester from you using my wife's PayPal account.

Of course, I shipped my damaged Lyen controller to you about 2 weeks ago and also purchased another identical controller from you. So, I'm looking forward to testing this product.

Last edited by Floont on Wed Aug 31, 2011 7:43 pm, edited 1 time in total.
Build 2: (present build): Rear x5304 on full suspension Mongoose, 127v 30s3p 10aH Turnigy Lipo, Lyen 24FET 100amp controller, CA2.2, 26" Hookworm front, 26" Crazy Bob rear, 203mm disc brakes, Airzound horn, twin Blaze 2 watt front lights - BURNED
All my posts on this site are licensed under the Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License
User avatar
Floont
10 kW
10 kW
 
Posts: 538
Joined: Tue Jul 20, 2010 1:15 pm
Location: Tampa, Florida

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby sol_schr » Wed Aug 31, 2011 6:10 pm

Hello,

Are there any of these testers left?

Thanks.

9/1/2011 PayPal Payment Sent

Thanks.

Greg
1 Black Schwinn Electric OCC Chopper
2 Black Schwinn OCC Choppers (To be Electrified)
2 Green Schwinn OCC Choppers (Parts)
User avatar
sol_schr
1 µW
1 µW
 
Posts: 4
Joined: Thu Aug 11, 2011 2:20 pm
Location: Dekalb, IL. USA

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby Floont » Fri Sep 02, 2011 7:10 pm


Received tester very quickly!

Thanks.

Looking forward to receiving my new controller I bought and my old controller back fixed.
Build 2: (present build): Rear x5304 on full suspension Mongoose, 127v 30s3p 10aH Turnigy Lipo, Lyen 24FET 100amp controller, CA2.2, 26" Hookworm front, 26" Crazy Bob rear, 203mm disc brakes, Airzound horn, twin Blaze 2 watt front lights - BURNED
All my posts on this site are licensed under the Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License
User avatar
Floont
10 kW
10 kW
 
Posts: 538
Joined: Tue Jul 20, 2010 1:15 pm
Location: Tampa, Florida

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby Evoforce » Fri Oct 14, 2011 3:35 am

Thanks Lyen!
"Energy is all consuming and it is never ending. It just changes form as it morphs through time and space... " Evoforce
                                                                                   Several 5403 motors,  no time to build projects! Phoenix Racer(5303) crystalyte suspension mtn bike LiFepo4 72/20.  (409) crystalyte 48 volt hardtail.  In process... Phoenix Cruiser(5304)  LiFePo4 48/20.  First electric bike a 2009 XB 502-700 style, 36/20 sla scooter bike.  All charged by solar!
Evoforce
10 kW
10 kW
 
Posts: 914
Joined: Tue Mar 09, 2010 2:45 am
Location: Fountain Hills Arizona

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby Floont » Sat Oct 15, 2011 8:23 am

Once you read the directions on how to use the tester (and believe me please read the directions), this tester is invaluable. I don't know how I would have tested my hall sensors and throttle without it.

Thanks, Lyen!
Build 2: (present build): Rear x5304 on full suspension Mongoose, 127v 30s3p 10aH Turnigy Lipo, Lyen 24FET 100amp controller, CA2.2, 26" Hookworm front, 26" Crazy Bob rear, 203mm disc brakes, Airzound horn, twin Blaze 2 watt front lights - BURNED
All my posts on this site are licensed under the Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License
User avatar
Floont
10 kW
10 kW
 
Posts: 538
Joined: Tue Jul 20, 2010 1:15 pm
Location: Tampa, Florida

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby auraslip » Mon Feb 13, 2012 10:59 pm

1) The motor testing LEDS move far too fast to determine if they're moving the proper order or direction.

2) How do you use this to determine the correct hall/phase sequence. I'm seeing three LEDS light up when testing the phase/hall controller.
User avatar
auraslip
1.21 GW
1.21 GW
 
Posts: 3696
Joined: Fri Mar 05, 2010 5:19 pm

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby teklektik » Mon Feb 13, 2012 11:56 pm

auraslip wrote:1) The motor testing LEDS move far too fast to determine if they're moving the proper order or direction.

When you turn the wheel and are testing a gear motor, the normal 5:1 planetary gearing works in reverse so you get a 1:5 speedup and the LEDs go like crazy. It seems to primarily be a DD test, but as long as all LEDs light for your gear motor you are okay (even if you can't see them stepping nicely).

I'm thinking maybe you have a MAC or BMC...
Last edited by teklektik on Thu Aug 02, 2012 3:28 pm, edited 1 time in total.
User avatar
teklektik
1 MW
1 MW
 
Posts: 1972
Joined: Sat Mar 26, 2011 1:15 pm
Location: CT, USA

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby stripedtuna » Tue Feb 14, 2012 6:42 am

auraslip wrote:1) The motor testing LEDS move far too fast to determine if they're moving the proper order or direction.

2) How do you use this to determine the correct hall/phase sequence. I'm seeing three LEDS light up when testing the phase/hall controller.



When you test the motor halls with a geared motor, what happens if you move the wheel very slowly, as in a few mm's at a time? Does that then show you the hall sequence better?

Also, when you do the motor winding / phase wire test on a geared motor, what is the expected behaviour of the top row of motor lights?
Edit: I just re read jateureka's instructions, which mentioned that all three top row lights may glow at once with the geared motors.. Thanks..

What does yours do when the phase wires are hooled up and tested Auraslip?

I am curious as my first build is going to be the mighty Mac..

Cheers,

Ed.
User avatar
stripedtuna
100 W
100 W
 
Posts: 114
Joined: Wed Nov 23, 2011 7:08 am
Location: Canberra, Australia

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby 999zip999 » Sat Mar 17, 2012 10:30 pm

Hi Lyen do you still have the testers. Thanks
999zip999
10 GW
10 GW
 
Posts: 4403
Joined: Sun Jan 10, 2010 1:40 pm
Location: Dana Point So. Cal

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby Lyen » Sat Mar 17, 2012 10:44 pm

999zip999 wrote:Hi Lyen do you still have the testers. Thanks


Yes, I do. :)
Items For Sale
Please sign up here and donate your marrow to save life.
User avatar
Lyen
10 kW
10 kW
 
Posts: 775
Joined: Fri Aug 17, 2007 1:26 am
Location: San Francisco, California, USA

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby 999zip999 » Wed Mar 21, 2012 5:50 pm

Got my tester today. Order on saturday. That's FAST. But can you keep up with my bike. Where can I find the directions. Thanks
999zip999
10 GW
10 GW
 
Posts: 4403
Joined: Sun Jan 10, 2010 1:40 pm
Location: Dana Point So. Cal

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby richirich1113 » Wed Mar 21, 2012 6:04 pm

Lyen is awsome, i like his shipping- its always been fast for me.

You can find the instructions on this thread.

viewtopic.php?f=31&t=20413&start=15
KHS full suspension - 26x 2.5 Maxxis Hookworms
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
User avatar
richirich1113
100 W
100 W
 
Posts: 221
Joined: Tue Dec 27, 2011 7:03 pm
Location: Port Angeles, Washigton

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby wojtek » Sun Apr 15, 2012 5:07 pm

got it a year ago, but just really got to it today. replaced the connectors to be compatible with my setup. great device!!!!

i did all tests: halls, phase wires, throttle all working fine :)

but when i engage the throttle, there are no lights on the right handside [6leds in circle]

Just ordered a PC interface cable to check what V is my controller set up for [gave mine to a friend with another controller]

BUT if the voltage of the battery was lower than setup in controller, would this test fail?

thanks!
WIRES AND CONNECTORS
http://www.endless-sphere.com/forums/vi ... 31&t=30176
http://endless-sphere.com/forums/viewto ... 31&t=32244
http://endless-sphere.com/forums/viewto ... 31&t=32152
KMX Cobra with Xlyte 5403
Go-One Evo with Cromotor
BATMOBILE - Astro 3220 / Nuvinci in progress
Velokraft e-VK3 SOLD
Steintrike Mungo Sport HS3540-SOLD
Scorpion FS HS3540-SOLD
Kona Dawg BMC v2-SOLD
User avatar
wojtek
100 kW
100 kW
 
Posts: 1270
Joined: Sun Nov 29, 2009 3:52 pm
Location: Luxembourg

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby RallySTX » Sun Apr 15, 2012 10:32 pm

If the voltage of the battery is lower than the cutoff or LVC of the controller, the controller outputs would go dead. That's my understanding anyway.
Brian L.
Brian Larson CST. KC9DAK.
Janesville WI.
2005 Schwinn Stingray Spoiler
2004 Schwinn Stingray OCC. The Stripper.
Build thread
viewtopic.php?f=2&t=22134&p=322312
Web. http://www.wix.com/brian_larson/rallystx128hhj

Image

Image
User avatar
RallySTX
10 kW
10 kW
 
Posts: 843
Joined: Mon Oct 11, 2010 10:29 am
Location: Janesville WI.

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby e-biker » Mon Apr 23, 2012 6:32 pm

hello Lyen
I got my tester today it looks cool cant wait to figure out how to work it!
24 s 3P lyen 18 fet magic pie 2 double crown monster ft forks large steel frame
User avatar
e-biker
1 kW
1 kW
 
Posts: 403
Joined: Tue Nov 01, 2011 7:24 pm
Location: RIVERDALE GA

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby goinmobile » Tue Apr 24, 2012 6:46 am

Lyen : How do I purchase your tester other than paypal? Visa # by phone is the only way I buy. My banker warned me on paypal, "3rd party account access is stupid". I believe him. Tried contact by email. no response.
goinmobile
1 W
1 W
 
Posts: 62
Joined: Mon Apr 23, 2012 4:14 pm

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby goinmobile » Thu Apr 26, 2012 7:57 am

Thanks for the PM on payment options Lyen, order will follow. Old fashion snail mail paper trail is fine with me. Total trust in this vendor.

I do third party payment, but only with a prepaid Visa over the phone, no connection to my bank account or "secure" account numbers for internet cyber crime to steal down the road. Also the sucker options avialable from paypal that results in an "illegal" action, a license to steal your money.

Small biz may not afford costs or un-timely payment of Visa compared to Paypal.

Thanks Lyen for the low cost of your products.
goinmobile
1 W
1 W
 
Posts: 62
Joined: Mon Apr 23, 2012 4:14 pm

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby fractal » Sat Jun 16, 2012 9:13 am

i was playing around with this cool little unit. its a bit hard to see the sequence of the blinking leds because they flash too fast. if you spin the wheel slower, they are not bright enough. i might try to film it and then run it in slow motion. what do you guys do?
Norco A-line DH bike with :
«cromotor/hubzilla» from http://www.greyborg.com/
24s 3p Lipo (100v, 15ah)
Methods LVC/HVC cell level protection system http://www.methtek.com
24 fet infineon controller made by Lyen, heavily moded by Methods
8awg harness by Icecube57
17 inch moped rims with Michelin Gazelle tires by John Rob Holmes http://www.holmeshobbies.com
other stuff http://www.ebikes.ca

details
http://www.helicamguide.com
User avatar
fractal
1 kW
1 kW
 
Posts: 375
Joined: Tue May 10, 2011 1:26 pm

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby John in CR » Sun Jun 17, 2012 12:11 am

fractal wrote:i was playing around with this cool little unit. its a bit hard to see the sequence of the blinking leds because they flash too fast. if you spin the wheel slower, they are not bright enough. i might try to film it and then run it in slow motion. what do you guys do?


Figuring out the correct wiring combo is too easy to waste time trying to do it with the tester, searching for a list of known controller combinations for that motor, or even typing a post asking about it. It's a quite simple logic/math problem for which I have posted the easy way to find the solution very many times on the forum. Learn the method and the logic behind it and you will lose all phase/hall combo anxiety forever. Once I learned that every hall combo has one vaild phase combo, and every phase combo has one valid hall combo, and of those 6 valids 3 are forward and 3 are reverse it all became clear. Combine that with the fact that for a sensorless motor, you simply swap any 2 phase wires to change direction, and it becomes downright simple. The only issue with geared hubbies is that you have to listen to hear a valid reverse, since you can't see it spin due to the freewheel.
John in CR
100 GW
100 GW
 
Posts: 11775
Joined: Tue May 20, 2008 12:58 am
Location: Paradise

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby NeilP » Sun Jun 17, 2012 3:11 am

fractal wrote:i was playing around with this cool little unit. its a bit hard to see the sequence of the blinking leds because they flash too fast. if you spin the wheel slower, they are not bright enough. i might try to film it and then run it in slow motion. what do you guys do?


Depends what you are trying to do with it, you do not need to be able to see the sequence, you just need to be able to see they are all working, remember as John says, it is a tester, not a setup tool.
Mongoose MTB, Fox forks,26x2.3 tyres, 180mm disks. 20s 20Ah LiPo, Lyen 18 FET,5304 in 26 inch EX721. 9k miles 2years

:) Only Irish coffee provides in a glass all four essential food groups: alcohol, caffeine, sugar, and fat :)

“Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law', because law is often but the tyrant's will, and always so when it violates the rights of the individual.”
User avatar
NeilP
10 GW
10 GW
 
Posts: 4632
Joined: Sat Nov 27, 2010 3:18 pm
Location: 49.17303, -2.05354 Jersey, Europe

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby michael.i@me.com » Thu Jul 12, 2012 7:25 pm

Kiwi wrote:Got mine yesterday. Put some additional plugs on it. Sending it off tomorrow to the other end of the country to a client with a dead bike.
Make this picture to help him.

Image


Does anyone have the picture that is supposed to be on this users post?
User avatar
michael.i@me.com
10 W
10 W
 
Posts: 69
Joined: Thu May 31, 2012 7:46 pm

Re: Ebike motor/controller hall/phase/throttle tester $29

Postby Ypedal » Thu Jul 12, 2012 9:56 pm

ES site status page:
http://www.ypedal.com/ES/ES.htm
----------------
http://www.ypedal.com
User avatar
Ypedal
100 GW
100 GW
 
Posts: 13450
Joined: Wed Dec 27, 2006 12:55 pm
Location: Moncton NB, Canada

PreviousNext

Return to Items for Sale - New

Who is online

Users browsing this forum: Hugechainring, Mammalian04 and 5 guests