That's a bad thing, because I'm Mr Procrastinator as long as I have a working ebike. When out of commission I'm Mr Nobreaksorsleepinguntilebikeisbackontheroad.
The Mighty Volt wrote:
If that doesn't work, tell him he is doing it for us
That's a better approach.
The Mighty Volt wrote:The 24 Fet is huge. 36 Fet must be an animal.
I'm still worried about the relative lack of caps. Does your 24fet have caps down the center channel between the fet rails?
It's a very large animal. Here's the Leo 36 (the silver breadbox) next to a Lyen 24fet (silver) and unknown scooter 30fet(black). Good thing Clown Bike has a controller rack behind the saddle, so any size controller can be accommodated. My Steveo Super36 is a monster too...not as tall or wide, but long as hell. Thank goodness my SuperV has a fat long straight downtube to accommodate that beast.
OTOH the 18fet is smaller than other 18fet controllers I've had.
PS- Almost forgot. Here's the open end of my Leo36. The green circle was for me asking him about the lack of fets in that channel, to which his tech guys said was correct. I post the pic because you can see the copper power rails protruding below the board....No traces I need to beef up on this puppy.