BMS for 10 cells in series:
Charging voltage CC/CV: 4.2V/cell
Balance voltage for single cell 4.20±0.025V
Balance current for single cell 0~85mA
Current consumption for single cell ≤20μA
Maximal charging current 10A
Maximal continuous discharging current 30A
Over charge detection voltage 4.28±0.05V
Over discharge detection voltage 3.0±0.05V
Size L116 * W55 * T20mm
Charger for 10 cells in series: it is a Ping style metal case
AC Input Voltage: 220~240Volts
Charge Voltage: 42V
Charge Current: 4A
Dimension: 150x90x50mm
Power: 180Watts
Price:
80$ without shipping.
10 S LI ion BMS and charger
5 posts
• Page 1 of 1
10 S LI ion BMS and charger
by mihai_atanasiu » Wed Nov 09, 2011 3:52 am
- Attachments
-
BMS_10S.jpg- (172.37 KiB) Downloaded 3 times
- mihai_atanasiu
- 100 mW
- Posts: 38
- Joined: Tue Aug 17, 2010 6:20 am
- Location: Bucuresti, Romania
Re: 10 S LI ion BMS and charger
by Kin » Wed Nov 09, 2011 11:16 am
This is nice because it's not so far off of 36v.
You might find that more people tend to run 12s Lipo, though. (If you sell a 12s version that might sell even better).
You might find that more people tend to run 12s Lipo, though. (If you sell a 12s version that might sell even better).
New to endless-sphere? Notice a lot of signatures recommending Ebike.ca? That's because it's the best place for a quality and manageable, (but still 'real'), first build. Justin is a solid supporter of electric bike development, and a good source of equipment.
My hat off a thousand times to the green people that effectively run this forum. The ES Mods are superb.
My hat off a thousand times to the green people that effectively run this forum. The ES Mods are superb.
- Kin
- 100 kW
- Posts: 1193
- Joined: Sat Mar 05, 2011 6:16 pm
- Location: NC or MA, U.S
Re: 10 S LI ion BMS and charger
by Idontwanttopedal » Mon Mar 26, 2012 6:51 am
I second that 12s is what I'm after and most people on here to
- Idontwanttopedal
- 1 kW
- Posts: 366
- Joined: Sat Jun 04, 2011 12:39 pm
- Location: Essex uk
Re: 10 S LI ion BMS and charger
by spuzzete » Fri May 11, 2012 11:58 am
mihai_atanasiu wrote:BMS for 10 cells in series:
Charging voltage CC/CV: 4.2V/cell
Balance voltage for single cell 4.20±0.025V
Balance current for single cell 0~85mA
Current consumption for single cell ≤20μA
Maximal charging current 10A
Maximal continuous discharging current 30A
Over charge detection voltage 4.28±0.05V
Over discharge detection voltage 3.0±0.05V
Size L116 * W55 * T20mm
Charger for 10 cells in series: it is a Ping style metal case
AC Input Voltage: 220~240Volts
Charge Voltage: 42V
Charge Current: 4A
Dimension: 150x90x50mm
Power: 180Watts
Price:
80$ without shipping.
Is it still available? Do you have a photo of the charger?
My little experimentation cave ( e-bike / li-ion batteries / electronics / etc. ): jacopo.tk
My Build: 36v 24ah "Home Made" Li-Ion & 500W rear Bafang
My Build: 36v 24ah "Home Made" Li-Ion & 500W rear Bafang
-
spuzzete - 100 W
- Posts: 151
- Joined: Sat Dec 03, 2011 3:12 pm
- Location: Alberta, Canada
5 posts
• Page 1 of 1
Return to Items for Sale - Used
Who is online
Users browsing this forum: No registered users and 1 guest