Can I hook 58.8v 14s to Nuvinci Dev kit controller?
2 posts
• Page 1 of 1
Can I hook 58.8v 14s to Nuvinci Dev kit controller?
by E-racer » Sun Mar 25, 2012 11:27 pm
I've got all the parts to make my bike 14s instead of 12s the only thing holding me back is the NV controller. Does anyone know if it will take 14s lipo or 58.8 volt? The site says its good for 48v E-bikes but that term can vary.
Kona Stinky: custom swing arm w/ batteries
-13s3p Turnigy Li-po
-Turnigy 80-100 rewound 130kv (Burtie's optical board)
-Kelly KBL 48201
-Nuvinci Dev Kit
http://endless-sphere.com/forums/viewtopic.php?f=28&t=35341
Goped ESR750
-12s2p Turnigy Li-po
-Turnigy 80-100 HXT w/halls
-Kelly KBL 48201
http://endless-sphere.com/forums/viewtopic.php?f=35&t=20732
-13s3p Turnigy Li-po
-Turnigy 80-100 rewound 130kv (Burtie's optical board)
-Kelly KBL 48201
-Nuvinci Dev Kit
http://endless-sphere.com/forums/viewtopic.php?f=28&t=35341
Goped ESR750
-12s2p Turnigy Li-po
-Turnigy 80-100 HXT w/halls
-Kelly KBL 48201
http://endless-sphere.com/forums/viewtopic.php?f=35&t=20732
-
E-racer - 1 kW
- Posts: 416
- Joined: Thu Oct 22, 2009 11:18 pm
- Location: Marietta, Ga.
Re: Can I hook 58.8v 14s to Nuvinci Dev kit controller?
by lostrack » Mon Mar 26, 2012 3:04 am
Pick up a dc to dc converter - vary the output voltage and boom!
Well, hopefully not boom, but your problems may be sorted.
T
Well, hopefully not boom, but your problems may be sorted.
T
-
lostrack - 100 W
- Posts: 228
- Joined: Sat Nov 12, 2011 4:23 pm
- Location: London, UK
2 posts
• Page 1 of 1
Return to E-Bike Non-hub Motor Drives
Who is online
Users browsing this forum: crossbreak, Fario10, Idontwanttopedal, mainsource and 6 guests