2 Cycle analysts large screen and small screen- SOLD!

[mdd0127]

Hi Everyone,

Update 6/11/12: Both CA's are sold! Thanks everyone!



I keep finding extra stuff that I don't need so if you need a good deal on a Cycle Analyst, keep reading.

One NEW only hooked up to bench test a motor/controller combo Large screen CA without enclosure or shunt
-----$100 shipped US or $90 + shipping international.

One Used but in great condition small screen CA-SA in an enclosure with inline shunt, but missing the spoke magnet assembly
------$75 shipped US or $65 + shipping international.

CA info: http://ebikes.ca/drainbrain.shtml

US buyers can pay with a US postal money order but international buyers will need to use western union to transfer the funds.

Let me know if you have any questions!

Thanks,
Danny

[Taxman]

Hi!

Just wondering if you still have the cycle analysts for sale - I am planning on using it for a motorbike conversion - I've already got a curtis 1221c controller - will the cycle analyst work with that? I've also already got a shunt for an ammeter, so I would grab the 90 dollar one if you still have it. Would you be okay to figure out postage to Australia? I can't get the private message thing to work, it keeps saying you don't exist.

Cheers

sam

[mdd0127]

I definitely exist, at least for now! I do still have the large screen for sale and it will wire right up to your existing shunt. You'll just have to program in the shunt value in the CA, which is covered in the instructions and many threads here. The only other wire to run is the speed sensor pickup down your fork, or if you tend to spend more time with the front wheel in the air than on the ground, running it to the rear might give better accuracy. It will come in the original box with a manual and nothing about installing it is hard. If you want to try to PM me your post code, or post it here, or email it to me, I can get you a shipping quote tomorrow. Also to be clear, the large screen one does not have an enclosure. It came that way, for OEM's or custom builders that need to flush mount it. You'll either have to figure out a way to mount it on your own or see if Justin will send you an enclosure for it. My email is my username here at gmail.

[MadMNN]

Hi
Shipping to Russia?
How much is the full price?

[mdd0127]

The small screen one is sold. Thanks k-ray!

The large screen one is still available.

MadMMN,

I think you would probably save money getting one from E-bikes.ca. Shipping to Russia will be very expensive and you'll have to use western union to transfer the money to me. ebikes.ca can take credit cards and gets bulk shipping discounts too so I would be willing to bet that you'll get a better deal there. Plus, the owner saved the sphere from commercialized doom so he's a good guy to give business to

Thanks,
Danny

[Gregor]

Does the large screen one have the standard 6-pinCA connector or is it a"stand alone" version requiring a remote shunt?

[mdd0127]

The large screen one does have a six pin connector on it but I wired it custom for my application. It's a stand alone model though and doesn't come with a shunt, mount, trigger magnet or enclosure. It's all boxed up with a manual and ready to go though. It still has the protective plastic on the screen!

The small screen one is sold and should be in it's new owners hands any day now.

[mdd0127]

Large screen CA stillllll for sale! Price drop $85 shipped in the US!

Will be listing goodrum BMS/charging stuff and 8mpcgt pulley stock soon!!!!

[Monstarr]

Large screen CA stillllll for sale! Price drop $85 shipped in the US!

Will be listing goodrum BMS/charging stuff and 8mpcgt pulley stock soon!!!!

What are the shippingcosts to the netherlands? Any kind of warranty still available?

[mdd0127]

I'll have to get you a shipping quote when I have some time but I'd be willing to bet that with shipping and western union fees, it will probably cost you less to order one directly from ebikes.ca That way you'd have a warranty, enclosure, speed trigger, and shunt too. This unit is a great deal for people in the US but when the logistics of overseas transactions are applied, it's not such a good deal.

[nieles]

I'd be willing to bet that with shipping and western union fees, it will probably cost you less to order one directly from ebikes.ca

if it wasnt, it would already be gone

[Monstarr]

Edward Lyen shipped me a controller for i thought something near 15$ using USPS.

[mdd0127]

Neiles pretty much nailed it as far as international purchases on this one goes. I really need to sell it but I also want everyone to get the best possible deal.....and to support ebikes.ca! Large screen CA still available.

If you're totally hell bent on buying mine monstarr, I'll be going to the post office to get a shipping quote on something else on monday and will happily get you a quote. PM me your address if you'd like.

Thanks,
Danny

[mdd0127]

Large screen CA, $60 shipped within the US. No international shipping on something this small! CA ONLY, no enclosure, bracket, shunt, etc. BRAND NEW!!!

[migueralliart]

By enclosure u mean it.is not housed in a plastic box?

[mdd0127]

That is correct. It is just the circuit board with the screen. The speedometer pickup wire and one button are attached. It is for custom installations. I replied to your PM.

Thanks,
Danny

[mdd0127]

Still for sale!

NO Paypal. Interested parties will have to go to the post office and mail me a money order. Sorry for the inconvenience.

[nicobie]

Is the plug wired in? Does it need a external shunt?

Drop me a PM if you get a chance.

Nick

[mdd0127]

Please read the thread.

[John in CR]

Please read the thread.

That's the kind of thing that's biting you in the butt getting rid of stuff...making an interested buyer go hunting for the details instead of taking the same amount of your time to answer the question. It's all in the marketing.

BTW, I'm interested too, and have that same question, but I'm not hunting for the answer.

John

ps- I'm not sniping at you, just sincerely trying to help.

[mdd0127]

The details are all in the thread, over and over again! How much simpler can it get??? People read the title, think oooo, I want CA, and start asking stupid questions! I don't want those people to have a CA and I sure as hell don't want to do business with them. If they see this and feel bad, they should! Maybe they'll read the thread that they're replying to in the future. My time isn't worthless! If someone isn't willing to read a paragraph explaining the details about an item they want, why on earth should I spend my time typing ANOTHER paragraph, with the exact same details.....that they probably aren't going to read. It's pretty simple stuff. I'm donating the CA to Amberwolf next time I go down to Phoenix. My time is better spent on other things.

[nicobie]

I don't see anything stupid about the question I asked.

What IS stupid is taking the the same time (or more) typing a response insulting a possible customer as it would to simply answer the questions.

I guess you know where I think you should stuff your CA....

[Ykick]

Let me know if you have any questions!

Which is it?

Flip out all you want but it ain't gonna help sell yer shit...

[mdd0127]

I should have said, "Let me know if you have any questions that haven't already been answered ten times in the thread." Sorry about that.

[mdd0127]

I don't see anything stupid about the question I asked.

What IS stupid is taking the the same time (or more) typing a response insulting a possible customer as it would to simply answer the questions.

I guess you know where I think you should stuff your CA....

If you had taken the minute and a half to actually skim through the thread, you would have found the answers to both of your questions so yes, they were stupid, and a waste of everyone's time. Maybe you like repeating yourself??? I don't.

I'd rather spend a small portion of my time ensuring that more of my time doesn't keep getting wasted by people that don't read.

I'll be stuffing the CA right in the tote full of a bunch of other cool stuff that I'd rather not deal with selling and taking it down to Phoenix to give to a good person that will put it all to use.