SKATEBOARD video & gps 23 mph

[papo2110]

got to ride my board with 6s 5000 mah very fast lots of power up hills in central park like nothing
next week will try to get video and gps

[papo2110]

i cut of 8" inches of the board feels better turns much better

[EBJ]

looking good!
Lets see some video footage when you get this thing finished.

[papo2110]

looking good!
Lets see some video footage when you get this thing finished.

will try to get some video sat going around central park and gps speed

[papo2110]

allmost there

[EBJ]

nice grip tape pattern. I like how "hidden" the electronics are from above.

[papo2110]

23 mph did not push full speed it fast very fast it will hit 27 mph if you are brave

[papo2110]

[EBJ]

awesome! congrats.

[Scruffoid]

Sweet. Nice looking work there.

[bzhwindtalker]

I will have to build one of these one day! Awesome BTW

[sk8norcal]

that looks fun!
i want one...

[papo2110]

eskateboard Cosmetics the board is running great fast 5000 mah battery getting 5 miles

[papo2110]

11

[papo2110]

mods

[papo2110]

brothers board

[papo2110]

board before the surgery

[papo2110]

after the surgery

[papo2110]

working hard

[rcelegans]

Excellent work on your skateboard! I have an Exkate Raptor 4 and have been using 6S 5000mA batteries and a mamba monster ESC and it runs fine with the brushed motor and I have the same Turnigy out runner motor and have been thinking of putting this motor on but wasn't sure. Glad I found this site and your posts!

Is there regenerative braking -or braking capabilities with this motor?
Also can you takes some pictures of the gear on motor shaft? I want to know how you mounted it on the shaft.
I noticed that on your brother's motor the gear is on the other end can you take some close ups of that.

Awesome work!

[cal3thousand]

This is sooo cool. I now have another toy that I need to make

Will you be able to supply any of those parts for those interested in making one?

[papo2110]

EZRUN 150 amp car esc
It has proportional brake
I weigh 180 pounds it stops
With no problem

[papo2110]

I am running on 6s 5000 mah battery
Going to try 7s 5000 mah battery
Should be very fast will post video and gps

[papo2110]

drive

[rcelegans]

Hey Papo
thanks for posting the close up pictures. I see that you have a threaded shaft on the motor that holds the small gear. Can you give me the specks on the shaft and where did you get the shaft from? My motor came with a 10mm shaft and was wondering how easy to change the shaft on these motors? I see a cotter pin holding the shaft in place is this all I have to remove to change the shaft?
thanks!