RC Cargo Bike - reduction drive 95% complete pg8
Re: RC Cargo Bike - reduction drive 95% complete pg8
by Byte » Sun Apr 15, 2012 3:21 pm
How are you going to mount the sprocket to the dalton?
-
Byte - 100 W
- Posts: 250
- Joined: Thu Mar 04, 2010 9:39 am
- Location: Venlo, Netherlands
Re: RC Cargo Bike - reduction drive 95% complete pg8
by damonjackson_spl » Mon Apr 16, 2012 7:25 am
I have machined out about 0.2mm from an old xtr 24t cassette id and it fits the Dalton beautifully.
So my first reduction is finished: 6t - 24t
Next is 6t to 22t
Then 6t machined out to accept a one way bearing.
Getting closer.
the ALL MOUNTAIN - Commencal meta 55
the BMX - Sputnic Skyline (park)
the City - Kona Dew Deluxe 29er
the Ebike - Santosa ALPHA FD (dirt jumper)
the BMX - Sputnic Skyline (park)
the City - Kona Dew Deluxe 29er
the Ebike - Santosa ALPHA FD (dirt jumper)
-
damonjackson_spl - 100 W
- Posts: 208
- Joined: Wed Jan 13, 2010 8:06 pm
- Location: Hobart, Australia
Re: RC Cargo Bike - reduction drive 95% complete pg8
by damonjackson_spl » Wed Apr 18, 2012 5:26 pm
My 8mm boring bar arriving so I have finished the adaptor from the 12mm shaft to the Dalton.
Yes this Dalton is very rugged, pretty tight shadow conspiracy chain, hopefully some stretch will improve the setup.
I know everyone uses grubb screws to fix sprockets to shafts but my bro (works for an engineering company) suggested to use split pins?
What are your thoughts?
Yes this Dalton is very rugged, pretty tight shadow conspiracy chain, hopefully some stretch will improve the setup.
I know everyone uses grubb screws to fix sprockets to shafts but my bro (works for an engineering company) suggested to use split pins?
What are your thoughts?
the ALL MOUNTAIN - Commencal meta 55
the BMX - Sputnic Skyline (park)
the City - Kona Dew Deluxe 29er
the Ebike - Santosa ALPHA FD (dirt jumper)
the BMX - Sputnic Skyline (park)
the City - Kona Dew Deluxe 29er
the Ebike - Santosa ALPHA FD (dirt jumper)
-
damonjackson_spl - 100 W
- Posts: 208
- Joined: Wed Jan 13, 2010 8:06 pm
- Location: Hobart, Australia
Re: RC Cargo Bike - reduction drive 95% complete pg8
by deVries » Sat Apr 21, 2012 8:41 pm
29 congratulations w/sweet BD present! Dude, can we convince you to offer some ES parts or custom work using that monster set-up? 
Great job reducing weight... can't wait for your finished project... Pics & Video please!
Great job reducing weight... can't wait for your finished project... Pics & Video please!
- deVries
- 1 MW
- Posts: 1652
- Joined: Thu Jul 10, 2008 11:29 pm
- Location: Solar Powered 3000w Austin Texas
Return to E-Bike Non-hub Motor Drives
Who is online
Users browsing this forum: Miles and 5 guests