Parts are finally showing up, so its time to make a thread for the new build...
Genesis V2100 Bike
5404 Rear Hub
Lyen 12 FET IRFB4110PBF
Custom Farfle Swingarm
24S2P Turnigy LiPo
I intended on using new 4S packs, but ditched that idea since they are still out of stock in the US warehouse.
This is my same pack from my old build. I pulled it apart, and cycled each pack. One weak cell thats been replaced, one pack evenly discharging to 4.5AH, the rest 4.6-4.7AH (4.15-3.5V).
A member made this for me. It ended up needing a fair bit of work and fine tuning to get it to hold the packs firmly and safely, but works well.
I'm going to jam some foam in the open areas, and put the SMPS for the headlight in the middle. The batteries are held quite firm as is.
I initially had a block of foam to hold the batteries, but ditched the idea for the aluminum box that would take up less space.
I laser cut a new cover for my controller, so it fits better in the area behind the rear shock.
I intend on eventually making a 24S2P booster pack out of 4S Turnigy's to go on a rear rack.
The 12 FET fits nicely behind the shock, so I will just run it at its limits and see how it handles it before I move towards something like a built 24 or 36 FET controller.