Ready to Build a Bike to Outrun a 450?

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.

Ready to Build a Bike to Outrun a 450?

Postby Dauntless » Wed May 02, 2012 2:13 am

Because you demanded it, here's the topic:

How would YOU build a 75 pound bike to outrun a 450cc both on and off the road. With or without shooting down a drone for parts.

viewtopic.php?f=28&t=34862&start=75#p574446

Image
Any sufficiently advanced technology is INDISTINGUSHABLE FROM MAGIC!
- Arthur C. Clarke
Dauntless
100 kW
100 kW
 
Posts: 1031
Joined: Sat May 29, 2010 1:49 am
Location: Coordinates: 33°52′48″N 117°55′43″W

Re: Ready to Build a Bike to Outrun a 450?

Postby Thud » Wed May 02, 2012 6:04 am

"Out run" as in speed?

That is really a simple task.....especialy since a 450 (I assume you mean a 450cc motocrosser 4-stroke) is a single purpouse machine. An agni 95R with enough juice will embarass a crf450 on a 1/4 mile run.

Now building an e-bike that will run with one for 2 laps on an out-door motocross track.....that would be special. It aint going to happen anytime soon that I can tell.

You won't be able to make competive weight with current technology....
get some......

All information & advice provided by Thud are "Open Source" & free for personal use & distribution under the following agreement linked below.
http://creativecommons.org/licenses/by-nc-nd/3.0/
User avatar
Thud
10 MW
10 MW
 
Posts: 2371
Joined: Thu Aug 20, 2009 6:20 am
Location: West Michigan,USA


Return to E-Bike Non-hub Motor Drives

Who is online

Users browsing this forum: MattyCiii, rodney, stocaz and 10 guests