flathill wrote:It has already doubled from what you can buy but there is a gentlemens agreement to launch the next gen every 5 years so people can make what they invested back.
The next gen 5v cells are just rolling out so figure double in another 5 years unless China or homemade comes out of left field
Do you have some more specifics you can offer us about this? News story, published research, press release, etc.
Point us to the next gen 5v cells, etc.
The race for 5v cells has been on for a long time
Hardest part is finding a stable electrolyte
wildcat uses dna tech which is no tech at all
Just try everything
This press release is over a hear old
Wildcat Discovery Technologies Discloses Fundamental Advances in Rechargeable Battery Materials Technology
Newly developed 5-volt electrolyte, cathode material boost battery performance 25-65 percent in cars, electronics, other applications
SAN DIEGO--(BUSINESS WIRE)--Fundamental advances in rechargeable battery technology disclosed today by Wildcat Discovery Technologies could result in battery performance improvements of 25 to 65 percent or more in electric cars, portable electronics, military, medical devices, and other demanding applications.
“This is a breakthrough discovery by our development team, which can lead to batteries capable of storing much more energy than current materials allow”
Wildcat has developed a pair of new materials that set new standards for the rechargeable battery industry, by providing unprecedented energy density of more than 675 Wh/kg while operating in full cells at 5 volts – levels beyond today’s industry standards.
Wildcat’s EM1, a novel 5V electrolyte formulation, and CM1, a new high voltage cathode material, have been shown to deliver a 25 percent improvement in gravimetric energy density, and a 61 percent improvement in volumetric energy density in the electrode, compared with existing state-of-the-art battery materials with comparable attributes. Thus far, batteries made with EM1 and CM1 have expected power and safety performance comparable to lithium iron phosphate (LiFePO4), while also handling more than 100 charge/discharge cycles in full-cell testing.
“This is a breakthrough discovery by our development team, which can lead to batteries capable of storing much more energy than current materials allow,” said Wildcat CEO Mark Gresser. “When batteries hold more energy, it creates new options for design engineers - electric cars can go farther, tablets, laptops and smartphones can be smaller with no loss of runtime, soldier packs can be lighter, and implanted medical devices can last longer before the need for replacement surgery. And while our initial tests have shown a 61 percent improvement in energy density, this is just the beginning – because the EM1 electrolyte is stable at 5-volt operation, it opens the door to development of a new world of cathode materials that should bring even greater advances.”
Gresser added that the new materials are fully compatible with industry-standard anode materials.
The EM1 electrolyte’s high-voltage capability is of special interest for the automotive sector, where cell development has been restricted by the inability of existing electrolyte formulas to cycle at high voltages. Current EV systems based on low voltage cells require complex and expensive pack designs and battery management systems. EM1 enables high voltage systems which are expected to reduce required cell quantities 30-40% vs. competing materials like LFP and NMC. Fewer cells and simpler pack designs translate into substantially lower costs for auto makers.
The materials were developed using Wildcat’s proprietary high-throughput synthesis and screening platforms, which enable rapid discovery and development of advanced materials. For the CM1 cathode material alone, Wildcat’s R&D team synthesized and evaluated more than 3000 materials in just eight months; this research may have taken years using conventional methods.
Wildcat is actively seeking licensees and partners for further development and commercialization of EM1 and CM1 and successor materials. Sample quantities of up to 1 kilogram will be available as of April, 2011.
About Wildcat Discovery Technologies
Wildcat Discovery Technologies is engaged in the discovery and development of specialty materials for clean tech energy applications; including materials for batteries, gas separation, catalysis and advanced structural materials. Wildcat has developed proprietary high throughput synthesis and testing workflows for the rapid exploration of new inorganic materials. This technology enables Wildcat scientists to synthesize and evaluate thousands of materials in the time it takes most labs to evaluate only a handful.
Also army videohttp://www.dvidshub.net/video/134777/ar ... 7CRCZV5mK0