Looks like i am getting shafted on the pike's peak race by the organizer, so i no longer need this motor, and could use the $ to work on other projects. I am also moving and need to lighten the load.http://endless-sphere.com/forums/viewtopic.php?f=6&t=35060
So i am selling the entire high power package for someone to play around with:
+ 2.75" Pirelli moped tire ( $45 )
+ 2 x 3.0 BMX tube ( $10? )
+ the 7 speed DNP freewheel, plus appropriate spacers to make the 7 speed freewheel work ( $25 )
+ the temp sensor head and wiring, and an additional 2 wires hanging out the motor for fans, if you chose to go to a high power cooling setup, like zappy has here: http://endless-sphere.com/forums/viewtopic.php?f=30&t=38231
. ( $15 )
+ the upgraded & shortened phase wires with dual 4mm bullets at the ends.. ( $?? )
The motor cost $180, plus the Canada shipping, which hurt. The motor is now $230 plus Canada shipping.
You can have the whole package for $265, plus shipping to the USA. I ship out of Colorado, via USPS so it will be fairly cheap to get it out.
It is still in perfect condition and hasn't ever been taken over 120c in it's lifetime. Cooling holes were marked out but never drilled. It has never been exposed to the rain and the windings/magnets are good as new. I have probably put 20 hours on the motor, tops.
This motor kicks ass, and in a small wheel will stand up, or exceed what a Crystalyte HT is capable of. With Zappy's cooling mods, it will be even more vicious. It is very efficient and would be amazing in a recumbent trike.