Looking for an OEM 36V EVG controller! Someone have one?

Looking for something? Need a special part, but can't find it online anywhere? Post what you need, maybe others will have it to sell. Guest may post replies to topics already here. All topics here will expire after 60 days of inactivity.

Looking for an OEM 36V EVG controller! Someone have one?

Postby hodgie » Fri May 04, 2012 3:23 pm

Looking to put 36V controler on my 24V EVG.
Own 36V and 24V EVG's with original Heinzemanns. Dirt road and easy trails (but some quite steep and long) in CO mountains + errands in town. Looking to upgrade 24V EVG.
hodgie
10 W
10 W
 
Posts: 75
Joined: Thu Apr 05, 2012 8:59 pm

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby e-biker » Sun May 06, 2012 4:41 pm

I have a 36 volt controller and push throttle and cruise switch, I got this stuff with a36v 500 heinzmann motor and I tried it out it works, make a offer.
24s 3P lyen 18fet clyte 3595 double crown monster ft forks Large hard tail steel frame
24 s 3P lyen 12 fet magic pie 2 double crown monster ft forks large steel frame
User avatar
e-biker
100 W
100 W
 
Posts: 246
Joined: Tue Nov 01, 2011 7:24 pm
Location: RIVERDALE GA

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby hodgie » Sun May 06, 2012 5:51 pm

Hello.

Does $35 for your controller ( I will use the throttle and cruise for spares, I guess) sound fair to you?

Thanks for responding to my post. Best.
Own 36V and 24V EVG's with original Heinzemanns. Dirt road and easy trails (but some quite steep and long) in CO mountains + errands in town. Looking to upgrade 24V EVG.
hodgie
10 W
10 W
 
Posts: 75
Joined: Thu Apr 05, 2012 8:59 pm

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby e-biker » Sun May 06, 2012 8:56 pm

Hello
yeah I will sell it to you for 35.00 plus 5.00 shipping if that is good with you send 40.00 to my paypal and your mailing address and I will send you a tracking # tomorrow.
Thanks e-biker.
Last edited by e-biker on Mon May 07, 2012 4:34 pm, edited 1 time in total.
24s 3P lyen 18fet clyte 3595 double crown monster ft forks Large hard tail steel frame
24 s 3P lyen 12 fet magic pie 2 double crown monster ft forks large steel frame
User avatar
e-biker
100 W
100 W
 
Posts: 246
Joined: Tue Nov 01, 2011 7:24 pm
Location: RIVERDALE GA

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby hodgie » Mon May 07, 2012 4:21 pm

Thanks. Done.
Own 36V and 24V EVG's with original Heinzemanns. Dirt road and easy trails (but some quite steep and long) in CO mountains + errands in town. Looking to upgrade 24V EVG.
hodgie
10 W
10 W
 
Posts: 75
Joined: Thu Apr 05, 2012 8:59 pm

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby e-biker » Thu May 10, 2012 7:52 am

SHIPPED 5/9/2012 .
24s 3P lyen 18fet clyte 3595 double crown monster ft forks Large hard tail steel frame
24 s 3P lyen 12 fet magic pie 2 double crown monster ft forks large steel frame
User avatar
e-biker
100 W
100 W
 
Posts: 246
Joined: Tue Nov 01, 2011 7:24 pm
Location: RIVERDALE GA

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby hodgie » Wed May 16, 2012 9:28 pm

? Have not received. ? Any way to track it?
Own 36V and 24V EVG's with original Heinzemanns. Dirt road and easy trails (but some quite steep and long) in CO mountains + errands in town. Looking to upgrade 24V EVG.
hodgie
10 W
10 W
 
Posts: 75
Joined: Thu Apr 05, 2012 8:59 pm

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby e-biker » Thu May 17, 2012 9:49 am

Hodgie I just looked it up and it shows deliverly on 05/11/2012 check it out I hope someone did not steal it. I never ship anything without a tracking # the postal service really sucks these days, good luck I hope you find it around your house. btw it as boxed in a box to big to go in a mailbox so maybe usps left it somehere around your house.
24s 3P lyen 18fet clyte 3595 double crown monster ft forks Large hard tail steel frame
24 s 3P lyen 12 fet magic pie 2 double crown monster ft forks large steel frame
User avatar
e-biker
100 W
100 W
 
Posts: 246
Joined: Tue Nov 01, 2011 7:24 pm
Location: RIVERDALE GA

Re: Looking for an OEM 36V EVG controller! Someone have one?

Postby e-biker » Thu May 24, 2012 7:53 pm

Hodgie I got the controller today in the mail returned from your address as unclaimed? :? what would you like to do with it I charged you 5.00 shipping and it costed me 9.50 to ship it to you the first time I dont want to pay another 9.50 on this deal so if you want me to ship it to you again you pay 9.50 or I will send you 35.00 back if you want me to ship it again I will need you to give me your address again. Thanks E-biker.
24s 3P lyen 18fet clyte 3595 double crown monster ft forks Large hard tail steel frame
24 s 3P lyen 12 fet magic pie 2 double crown monster ft forks large steel frame
User avatar
e-biker
100 W
100 W
 
Posts: 246
Joined: Tue Nov 01, 2011 7:24 pm
Location: RIVERDALE GA


Return to Items Wanted

Who is online

Users browsing this forum: No registered users and 3 guests