Recent content by Avigo

Merry Xmas to all ebikers..here is a clip to share the good feeling of xmas with friends. https://m.youtube.com/watch?v=-FenCe8YsZQ

Im trying to program PAS by current, eg pas 1 drawing 1 amps, pas 2 1.5 amps pas 3 2 amps ...etc etc I run my middy on 13 S. Has anyone come out with a way to set this up. Linear at starting current of 1 amp. I have been playing with this setup..huge jump in current... Pas 1 at 3%...

I use this on my middy, and my commuter http://www.hobbyking.com/hobbyking/store/__40271__Turnigy_100A_60V_Multi_Function_Watt_Meter_w_Temp_Sensor.html Not only it measures amps,volts and watts but also give you.. Max amps Max watts Max temp Cur temp Min volt Watts used Amps used Top right...

When Kepler reassemble my cooked motor l asked him to do a loop on the sensor positive wire. I put a switch to this loop and never look back. I can increase my range by 50% not having PAS. Done 1200km with this setup. When lm lazy l switch the PAS on.

l run 13S to overcome lvc of 43v. works great..my odo is reading 800 km going great..luv it. l hardly ride my hub drive. Kepler it would be great if u could order an additional LED. for me. mine is the 1st gen :-( l miss it by a week.

This system looks similar, it has been in the market for a year. It senses the movement of the brake cable http://www.bmsbattery.com/accessory/459-hwbs-hidden-wire-brake-sensor.html

Also factor in the quietness of helical gear, l like my middy more than my hub drive because it is very stealth, you can not hear the motor. Viewing from the stern it looks like a normal bike.

Kepler...what is the diff between your test bike and this current bike. You do not have the same chain coming off with the previous bike.

I use this with great success before l went into CA. This is a great lipo maintenance/charge/discharge/balance system. http://www.hobbyking.com/hobbyking/store/__20544__HobbyKing_HK_010_Wattmeter_Voltage_Analyzer_AUS_Warehouse_.html And very economical too only disadvantage you have to loop...

You buy the loom set from Bmsbattery.com or greenbike, the socket is not colored..freight is the killer

Real neat work Kepler...we will see your Nordic Atomix soon... I need help with the Bafang C950... l read the pdf file from Bafang...l do not think mine is the same version. In setup l get the following.. 1........ this l know rim size. 2........ option..10 - 35 kph ( what is this for????)...

Bafang came to the party with my one week old melted stator. They sent me the replacement stator after couple of weeks of correspondence. Thanks to ES, especially Kepler for his effort in taking the motor apart studying and explaining the failure with great photos. Also to Amy of GEB who...

Just to follow up on my claim on BAFANG, refer to the faulty coils which was cooked after only a week of running, ( see page 29) Bafang completely ignored me. They do not honour their product if you buy direct from a 3rd party via the net. But they will sell me replacement motor for AUD $450...

At first l thought the controller was fried, l was going to swap it with my spare infineion controller, but this is a worst case scenerio. If l can get it out l will try rewinding it myself. It looks like press fit. Amy from GE has reported it to 8FUN. I will wait for their assessment. The motor...

The motor did not last long :x It did 91 km, started life last week. It died when I clocked speed consistently 20-35 km for a 10 km trip with small hills. I wonder if I can get the motor replaced, anyway the motor is too small for my speed requirement. Mine came with the speed limiter...