@Hiorth: I´m thinking of using your propeller for my setup. Do you know what rpm you used it with when foiling?
I´ve ordered a PLE040 5:1 but the manufacturing/delivery got delayed (everyone needs a gearbox for their DIY Efoil ;)) so I bought a used PLE040 but with 8:1.
As I´m using a 290KV...
How far up from the fuselage do you guys set the motor?
I suppose that this depends on the ducted propeller size but also it maybe easier to not have to far down.
On kite hydrofoil we tilt the board when going upwind and therefore you need a long mast to get above the waves without getting the...
Nice! Amazing that you got up on this small board. On the first picture it looks like you have the cables to the motor outside the mast, did you ride it like that?
Also cool if it works with these type of hydrofoils wings as I assume that they are more high aspect than the Liquid Force wings...
What do you mean by Neugart is design for an outboard motor? What type of model do you use? When I speaked with one of their reseller in my country he told me their gearboxes PLE040 are designed for input speed below 10000.
Does anyone here have knowledge in what type of lubrication to use in the planetary gearbox like Neugart or Parker when using them with hight input rpm?
Should the gearbox be filled with oil?
Does anyone here have experience in laminate carbonfiber/epoxy onto PLA? I would like to 3d print the...
Nice job! Seems like you also nailed it. Good looking foil.
When you say "Sealed with epoxy" does that mean that you can not open it without a destroying it?
What type of board did you use? size and volume
It seems logical as you have the thrust so far down. And depending on the boardsize and distribution of the volume you may need to be to far back when start riding and when the foil lifts you you need to be further forward to keep it down.
Have you measured how much current you use when...
Congratulations! Really nice setup.
In what way is 12S to much? Would not that be adjustable by the trottle?
It would be interesting if you could change the angle of the backwing to keep the hydrofoil down a bit as the prop trying pushing the hydrofoil up. Then you´re able to gain more speed...
What type/size of cables do you using from the ESC to the motor? I bought 10 AWG but when I received the TPPower motor I notice that they are much smaller. Could it be silver that reduce the need for wider diameter? According to the spec it could take 109 amps.
Can you tell me how you use the sroka foil. I have the Sroka v2 and thinking of using that or build my own mast. Have you drilled a hole on the mast mount for the motor wires?
Do you think that the sroka foil will need a little more speed than the Liquid Force foil that pacificmeister use? Sroka...