Hi there
I'm interested in a 2000w V3 hub motor for an electric bike in a 24in rim.
It will be for a lithium battery on an electric enduro frame ( 154mm Dropout width)
the bike and rider will be a total of approx 140kg
how much would it cost including building into the rim and postage for...
The bolts do not line up - trying to screw them in with the wheel installed will cause dethreading of the bolt holes and render the frame useless. look at the photos - they speak for themself.
Yeah they came with the frame, I PMed the guy I bought it off here on ES but he's been inactive for a while so may be difficult. Hopefully the manufacturer gets back to me as yeah, its clearly a machining fault and should've been picked up in QA.
Unfortunately neither of the screw holes line...
unfortunely i cant just drill out a bit of the part where the derailleur threads line up as the two screws that hold the plate on would need redrilling like 2mm to the left - meaning it would completely bork the two holes where the screws mount the plates together
the second option of forgoing...
The bolts are tightened up, I've removed the whole plate to see if there was any play in them when loosened but no luck. unfortunately the plate cant be reversed as it's not symmetrical in that direction - the derailleur mount is moved by doing so (you can see in the pics that the derailleur...
Hi all,
After having had my enduro frame sitting around for the last six months I've finally had some time to put it together over the last few weeks - only to find out now that the rear drop outs are borked.
The enduro swing arm has torque plates on both dropouts, but on the deraileur side of...