Recent content by Djhandz

Mxus came back to me with this so feel better now plus the one thing I never stated when making order was axle size. Or well nether mind I am only 75kg and don't go crazy so should ok 142mm open size we will use 14mm axle, 135mm open size we will use 16mm axle

Hi guys. I just got a mxus 3k v3 motor and it has 14mm axle bolts? To my understanding the v3 was upgraded to 16mm axle Is this a v2 ??? I bought it from mxus store on alibaba I was clear in making my order and everything seemed to go well. From what I can tell it does seem to have 4mm...

Thankyou very much alexayala. Very understanding answer I will get power from my controller throttle Thanks again dude

Hi all. Reading a few horror stories about people blowing there cycle analyst Please can someone tell me if it's safe to use this pas sensor https://www.ebikes.ca/shop/electric-bicycle-parts/torque-sensors/pas-12p-chr.html Plugged in to the pas plug on 10v running a 22s battery fully charged...

Thanks for that John that's what I thought. I am glad you chimed in as I was going to initially pm you my question as I know you know your stuff.. I ran the 22s today did around 30 mile and it was nice to have the extra capacity had fun with burst of 4.5kw. (my cycle analyst limits to 4.5kw)...

Thanks guys...it's just I have the 4s pack sat there doing nothing so thought I might be able to put it to use. I could rearrange my packs and run a lower voltage but with 3x6s and 1 4s it's a little difficult as I have no experience splitting lipo packs Thanks again

Hi guys I am currently running my leafmotor on 18s lipo 75v fully charged. I have another 4s pack that I used to use with my mxus. Can I add this 4s pack and run 22s 96v fully charged to give a little extra range?? I normally pull around 4000w bursts but most of my riding is around 250-1000w...

Wrong forum

Interesting discussion guys I will try both 12s and 18s lipo and see how it goes

Thankyou very much that's what I will do as i want efficiency too Many thanks for your help

thanks for the useful info dude not sure of the winding but assuming its default would you recommend i stick to 12s lipo 50,4v fully charged?

thanks mate. i might just bite the bullet and get a phaserunner and run at 60v. i like how compact they are.. would this be a good combo?

Thanks Balmorhea I already have a few 6s lipo 10ah packs that I have been running for a while with no problems pulling peaks of 60 amp but mainly peaks of 30amp and avaraging around 10 amps out of them on my commute Yes them controllers look alright but there out of stock Any idea on how often...

I picked up one of these motors locally but with no controller Please could you knowledgeable guys recommended me a controller for best performance and silent running Thanks in advance

Yes thanks for all the suggestions guys I am leaning towards just keeping the mxus and reconfigure my packs But also hearing Alot about the leaf motor so might pick up one of those Thanks for your help guys