Recent content by djmeeg

Hi, oh They should be uploaded now. Yes I found those also. I am not sure what the rest of the numbers mean ie on the ebay listing they have 4601 but then I think the full number is 4601 942, where as mine are 4601 035 and 4601N 029. So does the last three digits mean anything ?

Hi , Thanks so much for tkaing the time to read my post and getback to me. Here are the best photos I can get of pcb and as per previous post you may not be able to make out hte markings but the 2 outer halls are marked with 4601 035 and the middle hall is 4601N 029.

HI everyone , I am looking for Hall sensors for Time ET moto Electric Bike. I have remove the hall sensor pcb and halls. Their markings on the hall sensors are : 2 x 4601 035 1x 4601N 029 Does anyone know which halls would be suitable or where i could source them ? I cant seem to find any...

Hi thanks for the info and indentifying the damage components. I am sure you are right but also I wouldnt know where to order the right mosfet and drivers from. I guess the mosfets in the controller are copies too ?

I managed to read the text on the chips D6D2110 1716 but still no idea what they are

Hi thanks for the reply, they load for me and on my mobile phone just checked. They may take a few seconds to load ??

Hi everyone, I have a sabvoton controller 100amp for a risun stealth bike. The controller when battery is connected to the bike is dead. So removed the conroller and opend it up. The PCB looks good for the most part but I think I located the issue. 2 of the chips i cicrcled either are blown or...

Hi, Everyone. It would be great to get some advice on my build. I have a magic pie 3 48v 20amp lithium ion cell battery pack. I wanted to keep the build as stealth as I could so I have cut the power and signal cables running from the motor. I have then built a wiring loom using turniogy 200amp...

Thanks for the advice, So I guess conclusion drawn is the wiring is not suitable and also I will need a good fuse wired inbetween the motor and power pack. So does anyone know where I could source suitable wiring ?

Hi Everyone, Glad to be apart of the forum and could really do with some advice on wiring. I am building a crusier e bike using a magic pie 3 1000w rear motor and a custom build 48v 10amp lithium ion cell power pack. Because I want he build to be stealth I have managed to run a wiring loom...