Recent content by forcefed

Lol what the hell is that... budget cuts? Why didn't they go with cardboard. I can only imagine the flex :shock: I'm fortunate enough to have a prototype of a heavy duty bracket made by sickbikeparts, don't mind the zip tie to downtube connection... it gave up pretty quickly lol, replaced it...

I finally managed to find a somewhat compact charger https://www.aliexpress.com/item/1005004110764385.html its 5.5" x 3.5" x 2" and just fits in my battery bag. Its rated at 3.5amps so almost double compared to some of those meanwell led driver power supplies. Btw i noticed with this new...

I'll save the psu experiments for a dinky hoverboard battery pack, i won't experiment on mine, paid too much for it. Lol good catch, funny that the 100w version does work at 120v https://led.meanwell.com/webapp/product/search.aspx?prod=LPC-100 Good info thanks. I dont want to bolt it outside...

Hmmm that's a good idea, didn't think you could do that. There's plenty of $10 42v 2a chargers out there that you could run in series, just not sure that's a good idea with those ali express chargers :lol: Lot of good choices here, this one seems ideal...

1 amp would be doable, maybe even half an amp. Just want to keep a charger in my battery bag at all times.

I'm looking for a small charger for my battery pack, something around 1" thick if possible, smallest i've seen so far is 2" thick. Any ideas?

Ah ok, found some 15mm ones 👍

Hmm can I use regular nuts and bolts instead? I have to attach two chainring to this adapter and get the spacing perfect with the cyclone, not sure those chainring bolts will be long enough, there's currently 9mm spacing between my chainrings.

Here's the stock chain ring with the free wheel in the middle, but I think I found the solution straight from sbp http://sickbikeparts.com/freewheel-spider-4-arm-104-mm/ Is 104mm the most common size chain ring? They have 110 and 130mm adapters also.

I was talking about the chain ring, currently they're connected to the free wheel on the crank.

Need to find one that fits a fatbike with a 100mm bb spacing, current one i have is for a 68mm bb. Are there any that bolt up to the sbp freewheel?

After 1000km i'm noticing the chain keeps dropping from the front chain ring during specific up shifts under load(300w). With no load maybe 5% of the time it'll drop, and rather than dropping to the left it drops to the right between the chainrings :x Since there's plenty of space between the...

Everyone's different.

I can't imagine doing throttle only with a 3kw cyclone, a bit too much twist and you're flying lol

Here's a good explanation why you need brake sensors on trails, not sure how much of delay the bafang has but every split second counts on trails https://www.youtube.com/watch?v=7EFM3zOpEMs&feature=youtu.be&t=549