Recent content by Gasmanrus

Thanks Martin

Thanks for the advice on the controllers, I’ll take a look at nucular, I’d not heard of them before.

You recon it may be dead then?

Hi Martin, do you have a link to the website?

What controller would you recommend? I have a 72v battery pack & MXUS 3k hub motor. I’d like reliability over a performance, maybe 80-100 amps would be plenty. Thanks. Rus

Hi, yes ignition (e-ignition) bridge is in place. This is the screen https://youtu.be/fYuk_V5WZrI

Hi, after doing a search on here & reading cautious similar posts (making sure programming plug is connected/ disconnected) I’m still getting an error 30h fault code in the display & a constant red flashing led. I have a new display screen & on/off/power selector switch & am still getting...

Yup that the one, I’ve contacted the seller & they’ve not been able to help & have stopped responding. Only lasted 6 months.. frustrating.

Hi, after doing a search on here & reading cautious similar posts (making sure programming plug is connected/ disconnected) I’m still getting an error 30h fault code in the display & a constant red flashing led. I have a new display screen & on/off/power selector switch & am still getting...

Thanks, I tried all sorts including dragging 2 pc towers out the loft as they had serial ports but both computers had been up there so long neither would boot up. In the end I ordered the Bluetooth dongle and calibrated the controller via the app. Happy with the power etc, I’ll have a play...

So I’ve given up trying to connect to the laptop & ordered the Bluetooth dongle. Hopefully I’ll have more luck with this.

So I’ve given up trying to connect to the laptop & ordered the Bluetooth dongle. Hopefully I’ll have more luck with this.

Ok, I saw on a search for a similar problem a user was experiencing that the voltage was only 10 volts on the black 4 way connector that goes to the rs232 connector & he added 12 volts (externally I guess) which prompted the laptop to recognize the rs232/ usb. I’ve done this but am still...

Hi all I have a Kelly KLS7218S controller with 72v battery pack & MXUS 3k hub motor. I am using the supplied usb/rs232 cable between the controller & laptop but I keep getting the error ‘no power to controller or usb has been unplugged’ I have power connected to the main + & - wires, phase...