Recent content by gomyles

Thanks for all the replies, This is a rear QS205 which is intended to go on a Stealth Enduro Style EBike with big power, like 8000W. There is going to be a lot of torque on these wheels for sure. Fingers are crossed that these will hold up but now I've verified my doubts.

I guess I should have used the search and realized that this is a method of lacing called radial lacing. Would still love anyone's input if they have experience or knowledge about this style of lacing and if I should have any concerns. Thank you in advance!

Hey guys, I ordered some of these QS205 motors and had them laced by Green Pedel, but when they arrived I realized that they are straight laced with no cross pattern. Are these gonna hold up? Or do these need to be torn down and relaced?

Hi Kartoon, I am interested, I have sent you a PM. You can reach me directly at AffordableEBikes@gmail.com Thank you!

Has anyone else had issues with the newest version of the 850c Display? I have an 850c display with a serial code stating it was made in March 2021 and I uploaded the V1.0.0 firmware and the LCD would not power on. Looks like it has been talked about a little bit on the threads and someone has...

Is that the program needed to open up the 850c.bin file ? Build env ? Can anyone do this? Willing to compensate anyone to if so via Paypal This is the code from the mctubster's post

So I tried the 860c firmware on the 850c screen. After holding the power button the screen does light up, but as soon as I let go of the power button it shuts off. Even if I hold it for 20+ seconds, it will not actually initialize it. Just holds the screen there. Can you or anyone point me to...

I will give it a shot with the 860 firmware, thank you for sharing

I am having the exact same issue with my 850C Displays. They are not powering on. Tried 2 of them, both brand new. I uploaded the file on APT Burn Tool and it reached 100 percent, but they will not power on. These are 850c displays and the serial on them looks as though they were made in March...

Added links below the pictures; Thank you very much for the detailed response! Maybe shooting for 120A is a bit of a stretch .. but I feel that this controller can certainly do more than the 60 its rated at (just due to its size, and # of fets ) Wondering if anyone has experience with these...

Hey guys, Here is my controller; https://i.ibb.co/5TJ582k/20210108-211419.jpg It is a pretty big controller and am hoping to increase current to about 120A from the original 60. https://i.ibb.co/n09rzM5/20210108-211435.jpg My understanding is to "beef the traces" which I believe means...

Thank you Amberwolf, always coming to the rescue, much appreciated!!

Hi guys, https://www.youtube.com/watch?v=e09wIGcGsxU The above video is my circumstance. Bike only had 46km before motor stopped working. Appears that the yellow phase wire is shorting to the other 2. When the yellow and green are connected, motor has resistance, yellow and blue, resistance...

Extremely impressive, love the build!!

I see you put the instructions for getting a board from PCBway.com as well, so can get one there too. Thank you for the great work! Looks awesome