Recent content by gordone

I see what you mean, was only thinking about keeping cabling to a minimium. Are you familiar with TSDZ2? Guess I need to install my Y-coupler then to get power to the front light? What is the voltage and max current ? I can switch the light ON/OFF from my display (using OSF firmware)?

I`m consider adding a taillight to by 860C display, but haven`t found spesifications... What is the output voltage and what is the max watt you can pull from the output? Thank you!

Ahhh… so you are using the same firmware on P860C ?

Thank you, looks like it has some a new 860c display with a new connector and the price has gone up on the old one? Need to look into having a spare...

Thank you for feedback! I understand, no hit that i know about… I had a spare display so up and running again. How good is the quality on the display? Is these rear? Or should I get a new spare display?

I have got problem with my display, the bike have worked fine for 2-3 month now... See attacthed photo, what can cause these ? what can I do? I have a spare display, is it a way I can backup the old display and download the backup to the new display?

I have a problem that bolt unscrew on left side. The bolt holdning the arm/axis in place…. I have tried to add locktite without sucess… Anybody?

Okey, So stress om the TSDZ2 is not a concern? I was thinking it could working easier if I had more ratio.

I have a full suspension bike with TSDZ2, and have a rear cassette 11/42. I’m planing to use the bike to work, but also offpist on tracks… My weight is 110kg + 5battery Should I have more teethd in rear?

OSF V20.1C.3 I have a question when it comes to set MIN and MAX torque. I have placed my foot and my weight on the left pedal (horizontal) position, when I monitored the torque reading in the menu under the variables I think it was I got 287 or something, then I updated the "Torque ADC max"...

Thank you :)

Thank you :) Have recived all the parts I need now :) I have a question for you. How have you ended up having the cable from the seat and into the backpack? Photos? Thank you :)

haha good point :) but I`m not negative to have in the backpack, I can see it common to have a spare battery in packpack made for battery (protection of back) and also many report improve weight distribution when cycling offroad. hehe So I`m not negative, if its hopless then I will need to...

I found two cabels: 01: This cable was not marked with size, but measured it to 2,7mm (diameter)... It has more isulation aorund so it`s stiffer.... 02: These cable is 10 AWG and isulation is thinner.. maybe more flexible ... ?

I understand, don`t have the option to have it on the frame, then I must go for a smaler battery :) Will start with a good packpack with good support first and then take it from there.. hope I get used to have it on the packpack :) I walking with packpack that are heaveier so I don`t think it...