Recent content by hetm4n

Hello. I present my construction made completely from scratch. It is an electric cross bike with a MIDDRIVE engine. Surron-like geometry. Frame drawn in Corel and milled from 7075 aircraft aluminum (10mm body, 20mm swingarm). Fardriver ND72360 controller (190A/360A-13kWmax) currently set...

Hello. I present my construction made completely from scratch. It is an electric cross bike with a MIDDRIVE engine. Surron-like geometry. Frame drawn in Corel and milled from 7075 aircraft aluminum (10mm body, 20mm swingarm). Fardriver ND72360 controller (190A/360A-13kWmax) currently set...

TYes, it worked. I bought a bluetooth programmer.

Hello. I bought a set of mid QS165 engine and Fardriver ND72360 controller, as well as wiring, display, throttle, etc. Connected cables, everything loose on the table. 1 problem is the lack of reading parameters from the controller. The application on the PC sees the USB adapter and has a...

Hello. I bought a set of mid QS165 engine and Fardriver ND72360 controller, as well as wiring, display, throttle, etc. Connected cables, everything loose on the table. 1 problem is the lack of reading parameters from the controller. The application on the PC sees the USB adapter and has a...

Hi. I bought a new SW102, a similar display came to the old version, this is marked as DM03. Has anyone tried to program it?

20.1C4 10 - Modified standing start, softer. What is this function?

Has anyone solved the problem with the new 850c 2021 display? after uploading the software, the display does not turn on. apparently there are other parts inside.

my friend bought a tsdz in a set with a 850c display. uploaded by applications for lcd 850 1.1 and unfortunately the display does not want to turn on. communication is there, we tried to upload from mbrusy 20.1.3c in version 2021. after uploading it also does not work. what's the problem?

I on 20.1C3New already broke 2 blue gears, it breaks them at the moment of sudden pressure going uphill, I have no idea why, I came back to 0.8.

Hi. today I uploaded 20.1c3 on ktlcd3 and there is a problem, the system starts but the up / down buttons do not work. I checked the button cables and everything is fine. What could be wrong? both 0.19 and 0.20 also the up and down buttons do not work. KTLCD3 V3 48V. Edit. I found the cause...

is c3new version available for download in hex file? on github I see only c3. the display is sw102.

I had a separate programming cable with the 4-pin version, hidden under the cover on the rack side.

I opened this Velofast, in fact an old controller, it had a different programming plug :) one motor for sure enerprof was purchased, my friend made a mistake, the motor bought with ps power was on the old controller. velofast from another store.

gentlemen, more and more motors are coming with new v2 controllers. my friend recently bought on pspower. bought 4 for the whole family from different sources, for 3 engines only 1 was on the old controller.