I have not had this problem personally but using the wrong firmware can be fatual, Vedder could have changed pin mapping or other that could have stopped firmware update from working. I would suggest buying a STlink v2 and if you don't have the ability to install Linux then you can follow this...
And Iv finished that part and it works great, I'm now started trying to attach the volume buttons to also control your speed but that is proving harder then I though through qt!
hi so i have fixed ble working perfect now with the the HM-10 chip,
one big problem with these chips is that you can't do write with response (unless its a fake) so when writing data you are limited to a 20 byte write.
i changed the bldc code so this isn't a problem any more and did some vesc...
Hi guys I need names via privet msg, for interest in testing and debugging my iOS and android app, basically every thing is working with the HM-10 chip via uart to the vesc, and I have also added ble to bldc tool and this will be added very soon.
I don't want to wast time with ppl with no...
Can't do wired to your iPhone as iPhone doesn't support the serial port protocol.
Best thing to do would be to use an hc-05 Bluetooth module to a very cheap 8inch Windows 10 tablet for now!
what phone do you currently use?
maybe if i can get blue working asp ill just compile a realtime data app.
do you need any extra fields in the real time data I'm looking to add temp.
The app will have support for a method of controlling your board board I think volume button would need to need more like cruise control, hold for progressive ramping let go to continue at that speed then volume down for brake.
in the setting menu I can already set a erpm and the motor will spin...