Recent content by JensenL

Hi Toorbough ULL-Zeveigh, Thanks a lot. That was exactly the (in depth) answer I was hoping for.. I'll go buy one today. :thumb:

Greeting everyone, I am building a complete e-Bullitt from scratch with a Shimano Steps motor (DU-E6001). I came across a Ferrite Core(?). The dealer manual says it should be installed if the motor comes with one. Mine did not, as I bought it from a local dealer that closed. Questions are...

Greeting everyone, A have the TSDZ2 with a vlcd5 display - odo around 5600km. This morning when riding the bike, I could hear the motor running when I was pedalling, but it was not giving me any assist. Battery fully charged.. Maybe something in the motor is worn out? Any suggestions on what...

@amberwolf, thank you for the reply. You where right! The controller was partly broken. When disconnecting it from display everything was fine. Have now ordered a new one :bigthumb:

Greetings everyone, I have a TONGSHENG TSDZ2 build on a Dolly (Dutch cargobike) with a VLCD-5 LCD Display. Problem: When I turn on the battery the display turns on. Normally the display had to be turned on manually.. When parked/inactive, the display turns off after approx. 5-8 min. as normal...

Hi, Thanks for the posts - I appreciate that! Yes it's probably the battery, I was also thinking about that at first. I will try to run it free from ground the next time it happens. And next find a batt. rep. guy that can test/measure the volt etc. for me. Thanks again. Cheers Rasmus Jensen...

Hi Guys, I have a Tongsheng TSDZ2 350w engine on my cargo bike. With fully charged battery I am experiencing, that my motor is beeing unstable in it's tourque. It's in all 4 assist modes when pedaling normal. It's kind of cutting powerassist ON and OFF every second or so. If I pedal HARD, I can...