Recent content by kikomania1

That's pretty far away from the current problem 🙂 I started doing this because the motor is 1500W, and the most powerful KT controller with Juliet waterproof wires is 25A, so the motor is far from it's power peak. Although your assumption is right, you can always change the motor wires. I'm...

Hello, I'm finally doing this. However, it seems there is some incompatibility between the controller (kt48svprk-ff01l) and the display (lcd8h). Although the wires are the same colors, the button for turning on the display turns off if I release the button. Also, the voltage in the display is...

I was thinking something in that way: If I allocate the new controller properly in my bike, I actually don't need 1-to-5 julet Just cutting and making waterproof connectors in the new controller wires will be made the magic. The cons are motor wire it's going to be longer, probably not good...

Hello, I'm upgrading my KT controller from 25A: to use 50A model instead: The wires are different and all the wires in my bike are julet, so I have to adapt them. There are two special considerations: - The 9 pins motors = motor phase lines (3 wires) + motor hall lines (5 wires), but I...