Recent content by lemon

theres also a 3d model for the gt2e and i bought the gt2e because the gt2b was not in stock (europe)

ok it works, but i control the motor by the steering wheel, how to fix that?

they are colored different, how am i supposed to know which one ist right? shall i try all possibilities? can i damage it by doing that?

Hi, it's been a while, but I have all parts laying around and wanted to start building the thing (https://endless-sphere.com/forums/viewtopic.php?f=35&t=82548) parts list: ESC: FTV 120A Car ESC Motor: noname 270kV brushless motor remote: HK GT2E (not GT2B) But I am running into some problems...

Ok, uhm i got an old laptop charger with got 19V 2.1A output. With how much Amps can I charge 4S/6S then with the imax b6? edit: nevermind just found this bad boy in my cable box: https://puu.sh/qKbrm/f61780a3c8.JPG

Ok, anyone tried this? https://www.youtube.com/watch?v=7wj-EB4-71M

Like this? http://www.banggood.com/IMAX-B6-AC-B6AC-Lipo-NiMH-3S-RC-Battery-Balance-Charger-p-908064.html I know these are fake imax b6's, but as i read they're not that bad Max power is 50W, so i can charge 4S with 3A and 6S with 2A, right...

So far so good, ordered everything except the lipos & charger Which charger could you recommend? i've seen a lot which dont support 6S, and that wouldnt be that good if i switch to 6S ^^ Is this good...

new wheels would be a big pain in the ass for my budget. for reference i use some youtube videos i've seen, for example greatscott used 6S with 400kv (15/30 pulleys // ~34km/h topspeed and ~20km range @ 10000mah) and Damir Bijedic (austria) used 4S with 270kv (18/42 pulleys // ~30 km/h topspeed...

is there any name for 5mm pitch and 9mm belt with? like gt2 or so (i have no clue on pulleys) Edit: found this http://www.ketten-zahnrad.ch/images/zahnriemenprofile.png so i should take T5, AT5, 5M or XL, right? how about this...

no, is that only needed for that ammeter or in general? if so i'll buy one Why is 60 too much? this is only 44mm http://www.aliexpress.com/item/High-quality-1pc-60-teeth-Bore-5mm-GT2-Timing-Pulley-fit-width-6mm-of-2GT-timing/32656535008.html or is a tooth pitch of 2mm not enough? nice, whats...

68mm wheels and the pulleys be like 16/40 on 4S, if i should switch to 6S 16/60

wups i didnt see the max voltage on that hobbyking esc. ok i now ordered this motor: http://www.aliexpress.com/item/5065-50-65-270KV-Heavy-duty-brushless-Sensored-motor-2-6KG-3-8S-for-Skateboard/32681820833.html it got the same specs than the alienpower motor, so it should not be that bad :)...

Ok that sounds good :) (I hope) final question: is the ESC cutting off at 120A, or could it be possible that when i use it for something else it would handle 200A or so and would overheat? rest in rip english

Thanks for that long text :) But this still gives me some questions.. 1) whats better on 6S @ 5000mah than 4S @ 10000mah? 2) whats better on a sensored motor? 3) whats better on that esc you send now than the http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=41741 ? thanks...