Recent content by Macmaxi

Just compare the description and technical information from the cable I linked. If they are the same, that should work

I use this one. Works fine. € 4,37 45%OFF | Bafang USB Programmierung Kabel Für 8fun / BBS01B BBS02B BBSHD Mitte Antrieb/Center Elektrische Fahrrad Motor Programmiert Kabel https://a.aliexpress.com/_EuaPhB1

Hi Doctorbass. I bought a Nxt used. Unfortunately, I simply connected it because it has the same connection as my Eggrider without checking whether it works without damage. I have a Bac 800 /Bac 855 Controller, a 48v battery and a Gmac motor and Eggrider display. When connecting it sizzled...

Hello I have the same problem with the vibration but a much weaker system My system consists of a Gmac with 12T winding and a Bac800 and a 13S 12P battery. Brief history. I also have another system with a Bac 800 with a regular Mac motor with 10T winding. With the 10 T Mac, the system runs...

@martin mertik. Did you have any tips to config a Bac 800 Specially to a Mac 10t or Gmac Motor?

Here you can buy the female Plug. Im searching too for the connectors... I did buy 2 asibac 500 too😁. But don't know which pins I need for cable to plug in I found two but don't know. You get everything on Aliexpress. I think the 2 different crimp connector are for different thick cables. A...

Hello PaulD and thank you for your interest in helping me. I already know that the Bac 800 actually means 800 watts. But I see no reason that he can no longer. A friend charged him with 3000 watts in his Grace one and nothing broke. I actually have the engine temperature and the controller...

Hello, everyone. For some time now I have had the problem with the Asibac 800 that my performance will be reduced. When I'm on the road to work with a distance of 11km and a continuous power of 1200 watts, this warning comes up for the first time after about 3km and the power is reduced to...

I've seen a lot of great bikes here, great ideas and bikes. How do you like my 🙂 Comments for improvements are of course welcome 👍🏽😉 My Vsf-Txxl Before, a normal Trekkingbike in xxl Size 70cm with Luffed steel frame. After a Ebike with : Mac Motor 10t cst v2 ASIBac 800 Controller...

Hi i often read in a Facebook Forum for Sur Ron. Many Members have the Asi bac 8000. Maybe can someone give you his own Parameter File to load it in your Sur Ron. The group name is High powered Sur Rons (Facebook) 2900Members... i think there is someone who can help you.

I merged the cabling according to the manufacturer's instructions or their pinouts. To be able to do an Asi autotuning, I still had to swap a phase with Bacdoor. I have attached the manufacturer information in the photos. As far as I know, I don't have an error code🤷‍♂️. But tomorrow I will...

Hallo Xenodius. Today I could ride my bike for a good 12km. Ivh use the Asibac with the Eggrider display and the 2 profiles that also work very well. My remaining problem, however, is getting started ... When I start at the highest level (5. Approx. 500W) in Eco mode using Pas and Throttle, the...

Hello Xenodius. Thank you for your interest in wanting to help me with my problem. My bike hasn't ridden for a few weeks now. ASI is a bitch😢. In the meantime I have my Bac free again. I also received a new parameter file with the basic settings. For the software problem, I also uncovered errors...

Hello and thank you very much for your efforts to help. I was lucky in bad luck. I had already ordered a bac 800 as a replacement and a ttl programming cable for the pc suite. What can I say, I loaded a new parameter file onto the Asi with the asi pc program and then everything was freely...

Basic or advanced I tested both. not able to save parameter or load a parameter file