Recent content by powerpeddles

Running the MXUS XF19C and the BR with a 52v battery with a 40a BMS, we see a 2000 watts peak on the CA, but it builds to that number. At wide open throttle, it will peak at 700 watts and then climb to 200

Thanks for the reply, are you saying the temp sensor upgrade you did would not work with s Z9 plug hub motor? If the battery has a 40 amp BMS (I'm going to have to take it apart as it's a upp battery that might be trash per the findings in the UK) if it's a 40a BMS the BR can max st 30 battery...

Ok so here is what zi have going on, I would love your input, I currently have the R1UP MXUS xf19c motor Ride1Up says the motor is 750w and 95nm with a speed sensor and it not clear of there is a temperature sensor. I have heard yes and no but not sure, I can purchase from MXUS the motor core...

Sold out and brand new seller :( Who is low rated

I like the All Axel motor alot. My consideration are weight WOT thrust 33 plus mph to keep up with Traffic I want to be able to Cruise at 28 mph I have space limitations do BS or PR are what would fit. I do already own a XF19C that is new and laced into a motor but it's not listed in the...

Did you buy the stock XF19r with no special winding? Does report speed at while coasting? Is there a temperature sensor? How are they still doing?

You have the 500 watt version? the XF19C?

What point are you connecting the temp sensors to? On the board? What about the other end?

The yellow wire? How are you getting the temps data to the CA?

You don't understand how helpful you've been, I've been vacillating on whether or not to get the z9 base runner wondering if it was going to put out enough power, the current controller is 22 amps so if my net gain is only 8 amps I was having a hard time justifying going this route even if I'm...

I returned the RTR kit, don't get me wrong I'm not down on grin they actually stepped up and did the right thing, I sent the stuff back at this point I'm looking at doing another build just wanted to find someone who's actually used their stuff and got it to work. I'm a bit confused with the...

You have the Aventon right? How is the Baserunner working for you now? Are you saying the CA resolved the issue not using the preset motor parameters in the PR software? I ask all of this because I'm doing nothing similar to you I'm taking an existing ebike and basically just using the...

I feel your pain I bought a GMAC RTR key and they could never get it working right, motor cogging, shuttering, when you put and resistance on the wheel.. Did you ever get it sorted out?

Has anyone be able to get the Z9 BA to work with the MXUS XF19 AKA GDR19C If so can you share you experience and how it has performed? Was set up as easy as outlined in the BA manual any tips and tricks? 48 v MXUS XF19C

I want to build a reliable city commuter that will: Sprint for 2 mins at 35 mph Cruise at 28 mph throttle only on flat terrain 20 mph on a 10-degree incline. The high ambient temp is 90 degrees The bike is 56 lbs 27.5 wheels 2x4 inch tires Priorities Set it and forget it no need to...