Recent content by sanfox

I am trying to get married working dcf file for induction motor, (which works well with DLD UK0328.04 which I have not now), with DLD UK0319_23. After uploading dcf file to DLD UK319_23, I have 9 errors. It's not so critical, after some pases they was solved. But now I have strange faults...

Any body use dvt comand during bootloader mode "save EEPROM" to downdoad firmware from controller (save dld)? Command -- Alias -- Description save -- Reads data from a memory space and stores it in a file - assumes controller...

Few hours later... I had wiring baypas line with resistor and button parallel to contactor. This method helping to precharge condensors and after it engage contactor by SCWiz panel button. 1,2,3 test passed,4 test rotated motor, 5 test with fixed rotor by pipe wrench. Two final windows only...

DVT help says: Comands to load: load -- Load a binary file into any of the memory spaces - assumes bootloader is running load_dld -- Load a dld file into memory spaces specifed - assumes bootloader is running Comands to save: save -- Reads data from a memory space and stores it in a file -...

Little step forward. I have load test firmware by using DVT. SCwiz was conneted to controller and check some parameters automatically. I have set motor data and tryed to make first test. Program showed some graph. Test number two has not success because contactor was not closed. I have try...

Hi guys! I want to find dld firmwares for my SEVCON GEN 4 controller which has not sin/cos driver. It has abbility to work with induction motor or with pmac motor with Halls. I want to try to tune both types of motors. I have some firmwares and a lot of DCF files. But more of it for PMAC motors...

I have made some modification of DLC-28 (ME-1302). In stock condition it's can't hold enough load. Terminals burns inside connection box. I have made additional oil cooling (silicone oil) like at the scheme. It's require hermetisation of the stock motor. After modification this motor can hold...

Very good! I can see all pictures! Thank you!

I don't know reason, but I can't open this link! My friend whant to test ME913 motor performance for his motorcycle and whant to make himself stand. Can you make photo of your stand as example for him?

E-vector, please repost your latest pictures in smaller screen, it's not opening.

So what? How it's can help for us? Number ME913 mean that in 2009 year John has work more productivetly and made 13 configurations of one motor?

What battery do You plan to use for the kart racing? I have Toshiba LTO cells for my new battery 9kWh, and after assambling it I will try to test maximum rated power of the motor on the straight road.

It's look so, but some motors named with another way like my DLC-28 (ME1302). The production line of Motenergy motors not so big, so I think that thay don't encrease four digits!

Can you make test of rated power of your motor? An example, can you rotate your motor about 15 minutes at half of maximum power?

ME1304 has 8 magnets (4 poles). It's possible to try to rise up headroom factor to 95%. The field wekeneeng must begine to work when headroom factor reach up set value. You can get 10% plus power if you encrease headroom factor.