Recent content by sinisterminique

Hi curiousnorth, Yes i'm still working on this project and in fact i have designed a 3 phase mechanical driver wich will allow me to dump any voltage i wish into the motor,such a device is not found on the market so i had to invent one. I had to go thru many ideas and desings before i finally...

hey markz, your right,its all about the voltage but most importantly,its about the frequency,the HZ in your signal is motion,the more HZ the more watts you will have. Gerard is working on cranking up the HZ by means of a mechanical device(he uses small hub motors as frequency generators but the...

btw,i need to put 300v into it,100 volts for each of the 3 legs. company in korea stamped the drum as being tested with 310vdc,i would definately love to do the same.

i dont think a commutator will work either,i need my contacts 30 degrees appart with a width (or duration) of 6 degrees.

more info i found about the stator http://www.magnetictransportsystems.com/linearmotors2.shtml

I just found the real name for this motor, its not a real 3 phase motor as i suspected what it is in reallity is a : long stator linear synchronous motor go ahead and google it. It IS derived from maglev technology and i found a good description of what it is right here...

wow,nice disection there bro,you are on some point and wrong on others, You mentinnoed i needed to use a contactor, imo a contactor is nothing more than a glorified relay,but in any case absolutely not suitable for my intended use of building a mechanical controller for this motor. My...

sorry,picture didnt upload on first try...file too big..

on a more serious note, I'm not an expert at this but i am trying my best to figure it out. I did some calculations based on the stator and nuber of poles and the correct timing should look something like this i think.the picture represents "on time" for phase 1 when energised through out the...

yep scotty :lol:

already in use in EV projects: https://www.youtube.com/watch?v=UTLzlBWLxCw and the 25 KW generator being turned by this motor in israel,still under development or else they would be selling it by now,obviousely,but promising still.their limitation comes from the fact that they cant run this...

in his videos,gerard claims that the output on the shaft of the motor during his testing was 232foot/pounds,more or equal torque to that of some small cars... just cant help it but picturing this motor in different applications,that video of a trike running on this motor was pretty damn cool,the...

just to be clear,im not trying to replicate what he did,just trying to get this motor to run with high rpm and high torque so i can experiment a whole bunch of things with it.my goal is to find out what is the limit of this motor,i want to spin this thing to its limit.

this will explain better, at 17:14 he starts the self loop part but watch the whole thing for a better undertsanding of what he is doing: https://www.youtube.com/watch?v=aOLnf_gP7K8

nothing to do with perpetual motion or such,as for the laws it does not violate them,its our understanding of how this motor really works that we need to work on,as for the motor running in self-loop,its on video on youtube,please look it up and see for youself. Anyhow,the topic here is to try...