Recent content by two_shirts

  1. T

    BBSHD failed - Display working, intermittent at first then total fail

    Help please! Everything was fine, then motor started cutting out all together. Display fine, no error. Power cycling would fix the issue and it would run fine again, although its possible that the power was reduced, not 100% sure. That worked for about 4 power cycles, then total failure. Very...
  2. T

    EM3EV EM3ev Jumbo Shark - 52V 17.0Ah won't switch on, strange LED pattern

    I have a EM3ev Jumbo Shark - 52V 17.0Ah about 2.5 years old, apparently in good working condition and capacity till this week. It has a push button on/off switch with 4 leds in the same panel. The LED closest to the switch is red, and the other 3 are green. They are always on, and not affected...
  3. T

    BBSHD Setup - Luna Eclipse chain ring has bent tooth

    Thanks for your replies. I have ordered a 46T Lekkie that is on its way, so that should help me keep off the 11T on the back. I actually bought a few 11T Sunrace rings for the back as they go so quickly, but this is not an ideal solution. I think it is quite possible that the bad tooth was...
  4. T

    BBSHD Setup - Luna Eclipse chain ring has bent tooth

    I have a commuter set up based on a 29ER hardtail with a BBSHD and a Luna Eclipse chain ring. After about 4,000 km, when pulling away from the lights yesterday at high power, my chain was completely jammed on the Eclipse. Basically, one tooth was substantially bent laterally, catching the...
Back
Top