Recent content by tyrian869

I thought about that too, I'm interested in possibly reloading the firmware thinking that in doing that it might fix the 3 beeps and 3 vibrates error that I am still having...I want to play with this thing so bad! I still need to contact support what was the phone# I'm in the USA, I don't...

that would be $123.36 US dollars No when you power the Yuneec E-Go board the beeps you are hearing come from the motor, yes the remote makes noise too, I'm getting 3 yellow flashes and three loud beeps from mine. Hall sensor test results! two of the three Hall sensors are turning on and off...

To make the motor rotate the coils must be energized and de-energized two at a time in a specific sequence. To produce a tone only one set of coils needs to be energized. Since the signal is not sequenced through all of the coils the motor will not turn. The signal sent to the coils for normal...

was it necessary to take this apart? :? LOL We need to make sure the hall sensors are getting power and are working. using a multi meter on the ECU end, we can test the sensors there too. here is a video showing how to do test the hall sensors I'll keep the motor apart and hook it up...

Another Finding, I did a continuity test between from the main plug of the motor (short pins) to the small circuit board that the three hall sensors are soldered on to. There is continuity telling me that the cable is fine, Note: I took a small flat head screw driver and carefully scraped the...

https://drive.google.com/file/d/0B2pMsf1J3UOzelkyckhJempfMms/view?usp=sharing https://drive.google.com/open?id=0B2pMsf1J3UOzYmM5MW00M252N28 https://drive.google.com/open?id=0B2pMsf1J3UOzUmU1Q3lUMXZVNkU https://drive.google.com/open?id=0B2pMsf1J3UOzOVBNQzJuVnJ5aW8...

https://drive.google.com/open?id=0B2pMsf1J3UOzcGtPX2xSMXc0Qk0 https://drive.google.com/open?id=0B2pMsf1J3UOzNWp5LTFfUHNjaFU https://drive.google.com/open?id=0B2pMsf1J3UOzN0tjX2lqM2JNNjg With some leverage and brute force anything is possible!

I can try and help take the Yuneec motor apart I started to but stoped because I decided not to, I think I have the tools to do that though. I have 3 flashes/ vibrate on remote, I replaced 2 35v capacitors on the ECU, I have tested the motor without hooking up the sensor with an independent...

Hello All I am new here, I have a Yuneec E-Go with what I think is a bad ESC. No warranty left, I can't seem not to find any replacement parts, I think it is time to take it apart, I have a good background with electronics, I wonder if I can fix the ESC via component level, if anyone can recmend...