Search results

Date Relevance Most replies

  1. Beuhji

    Adding hall sensors to outrunners

    Since I've read that sensors must be placed in between two teeth of the same pole I'm obsessed with that but I've forgotten the reason ... finally we are just interested by magnets :?: :|
  2. Beuhji

    Adding hall sensors to outrunners

    Thank you for your reply Burtie ! But all phases are connected to each others, do you think I will get a readable result anyway with a compass ?
  3. Beuhji

    Adding hall sensors to outrunners

    Hello guys ! Thank you for this prolific topic, there is so many interesting experiences in ! But now I need your help about the original winding scheme of a 80-100. Is there some tips to fit the sensors at the right place whithout any idea where the windings bengins and where it ends ? I have...
  4. Beuhji

    alternate to turnigy 80-100

    Received one from leader hobby last week. There is very loosing windings on it, poorest quality than HobbyCity but this time I have hexa screws on the can ... Do you know an high temperature exoxy ? Don't want to run it until I have strongly fixed these windings !
  5. Beuhji

    Burning up brushless ESCs

    Hi guys ! I can just say one thing about Castle Creations ESC : your investment is never completely lost. Their after sell sevice is crazy, I have burned two times my CC 160HV ICE (about 280€), replaced two times for 0$ by CC even when I asked for a non waranty repair because I have directly...
  6. Beuhji

    Castle Creation RECALL

    Do someone knows more about the real issue ?
  7. Beuhji

    My e-KMX

    @Arlo1 : I'm sorry, it must costs another 50 bucks to send it to you from France, are you sure ? ;) Humm, are the astros are less sensitive to heating or more efficient ? :? 3210, 3215, 3220, turns, what is the best choice for my KMX ? Pfff, I have retrieved the fan that I have planned to...
  8. Beuhji

    My e-KMX

    Ok, today I have disasembled my motor to make a check up and to try to understand what appened. => Ball bearings are all OK => Just have seen a cutted winding but don't know if I do that when by disasembling the motor or before ... => Windings seems to have been heated but only on one side of...
  9. Beuhji

    My e-KMX

    Thank you for your support guys ! @Recumpence : My dream of a robust, powerfull, efficient and cheap motor disappears ... You are right as usual :oops: @AJ : It seams to be very similar indeed. I have checked the winding resistance of the motor after cooling and before to burn the...
  10. Beuhji

    My e-KMX

    Hi guys ! I'm not very lucky with my build ... First I have received my V3 drive from Matt but HTD belts don't fits on the 70 teeth pulley for an unknown reason ... After testing of 4 diferent brands of HTD belts, I have found a GT2 type which fit by stretching it very strongly...
  11. Beuhji

    My e-KMX

    Yahhhh !!! Today, I have received a parcel from Matt ... I'm HAPPY :D ! BUT, I must buy a complete set of hexa keys with imperial standard, I cannot do anything with my metric set !!! :shock: I would also like to thank the French customs that have kept my package hostage one month and for...
  12. Beuhji

    My e-KMX

    OK, by waiting for my MS V3 drive with slipper clutch :P and a total rebuilding, I have installed a steering damper in order to stabilize my e-KMX at high speeds : Steering damper from eBay (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220501604857) Mouted between the frame and wheel...
  13. Beuhji

    My e-KMX

    I have found some pictures of Matt's secret project : the E-3POD Antistatic !!! :mrgreen:
  14. Beuhji

    Keewee Cromozone DH build

    Yeah, another build with MS drive and a Turnigy powerhouse ! I will read this thread carefully, I wait for my MS drive with slipper clutch to update my personal drive on my e-KMX mounted with a 80-100 130kV !!! :D
  15. Beuhji

    My e-KMX

    Ok all those issues are fixed, I have brought a new battery, strongly fixed the flag, and reajusted rear wheel ball bearings. Now i will try to fix other problems like belt slipping and direction stabilization. Matt you are again my muse ! For the belt slipping I will buy your slipper clutch...
  16. Beuhji

    My e-KMX

    Unfortunately it is 6S4P pack I cannot remove this element ... Allo, Hobbycity ? :evil: Do you think it is possible to replace this pack with a new one (the same) without hurt the others (old) packs ?
  17. Beuhji

    My e-KMX

    Bad day for my e-KMX ... => The flag fixing had exploded due to hard air flow => Front light / signals device fell due to vibrations => One element is inflated on my lipo battery pack This element is softly inflated since the begining of my project and has usualy a lower voltage than others...
  18. Beuhji

    My e-KMX

    Yes, the final goal of this project is to take me over the 8 km between my house and my company. It must work all the year, without weather concerns. Signals and lights are very important for this very low frame. The velomobile concept is my model ! The last step will be to make a strong...
  19. Beuhji

    My e-KMX

    OK ! I have tested it all days since last weekend and the maximum voltage ripple seems to be widely better (2.12 V) than the previous build without capacitors (arround 5.3 V) ! Moreover, my new top speed is 75 km/h :D Thank you Matt !!! However I have some problems with bearings of the rear...
  20. Beuhji

    My e-KMX

    OK, it is done with your usefull advises Matt :lol: It has taken me two hours, I hope it will be functionnal ... It only remains to solder connectors on these huge cables before testing.
  21. Beuhji

    My e-KMX

    My brand new Castle Creations Phoenix ICE HV160 for 0$ !!! OK guys, it is about try to not re-smoke this little jewel :mrgreen: I have bought five Panasonic 50V 1000µF low ESR capacitors (ref : Panasonic EEUFM1H102 ), they are big and put four of them closest as possible from the controler...
  22. Beuhji

    My e-KMX

    I just got a mail from Castle Creations ! They says that my Phoenix ICE 160HV is taken under warranty and they send me a brand new one for $0 :mrgreen: I love amercian buisness ! My two Turnigy monster 2000 returned to HK from june are even ... somewhere beyond the seas ... :roll:
  23. Beuhji

    My e-KMX

    Thanks all, I am very interested by your adapter Matt ... or by your complete drive. I am affraid that my drive unit especially ball bearings die fast. They are too much stressed. I am also very interested by a slipper clutch ... Hummm I'll go sell some drugs to buy your drive Matt :P
  24. Beuhji

    My e-KMX

    THX Kim ! I'm waiting for this mail :D Thanks Bubba for your link it is exactly what I seach ! Now do you know where I can find a rear sprockets for bicycle chain with 6 holes disk mounting around 54 teeth ? How many teeth has Matt's one ???
  25. Beuhji

    My e-KMX

    After technical means, technical results ! => Top speed : about 73 km/h (even when climbing 10% roads !) => Maximum power measured : 5300W => Consumption : about 25 Wh/km => Weight : 35 kg Main issues : => Belt slipping, belt destruction : I have replaced T5 timing belt and 15/30 teeth...
Back
Top