Search results

Date Relevance Most replies

  1. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    Your project in near perfect. :) I use the electric bike on my commute to work in a big city and intersections and traffic require very frequent stops and starts. If there is no setting that can help with this, such as the "Startup Boost" in Power or Torque mode, it would be very useful for...
  2. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    Haaaa Ok, and can this work as a sort of "Startup Boost"?
  3. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    I wanted to try to set the "torque adc offset fix" parameter which, from what I understand, serves to influence the attack sensitivity of the engine based on the values read by the torque sensor. I understood that a negative value would sensitize it and a positive value would delay it, but only...
  4. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    Now, after I have already mounted one, closed the engine and checked that everything works, I am programming another ESP32 board for another engine and I am thinking that perhaps it could be useful to also have the serial cables exit the engine case, in order to being able to debug without...
  5. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    Ok, not fixed but note the cause I added capacitors from 47microFarad to 4700microFarad but when the antenna is connected the "Brownout detector has been activated" loop still starts Without the antenna everything seems fine
  6. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    Yes My adapter is an FT232 by DSD TECH, clear plastic case There is a mod to resolve the problem ? Maybe a cap on 3.3V line out ?
  7. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    Just a question After switching on, on the Android app I have the "legal" icon active even though on the XH18 display, the limit is set at 45Km/h If I override via app, the icon only turns gray after I select "LCD master", the other options don't work. After this operation, all other state...
  8. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    But you ave installed the ESP32 board + custom fw ? In case, have you any message on android app ? The display is not specific for voltage supply, only one model
  9. V

    New TSDZ2 Open Source firmware with Bluetooth interface

    WOW I had the cards made in March 2021 then I didn't find the time to assemble everything Now that I'm taking my bike back to go to work I've rediscovered the project and decided to assemble everything. Really great project. I've only had a couple of problems, I'll report them for reference. 1)...
  10. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Thanks for your feedback Have you a link to "Version 20 beta 1 from Buba's own drive" ? It's already possible to download directly from Buba's drive ?
  11. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    :bigthumb: Thanks, very intresting wiki, well done For the optional part, Sugru could be used instead of liquid silicon because it can be molded like Pongo
  12. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    You are right Both file must be .hex There must have been a problem in the deployment process
  13. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I have compiled and tested the latest version on your GitHub. The current reading is much better, as is that of the Volts. There remains a discrepancy of 0.3V on the Volts and about 20W less reported on the LCD3 compared to the Wattmeter (on a reading of about 570W reported by LCD3) I wanted to...
  14. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Ok, thanks But the "Return 0" at the end of the main is necessary ?
  15. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi, I'd like to know if the following warning messages in normal when compile a new release : ... main.c:125: warning 126: unreachable code .... .... main.c:83: warning 126: unreachable code The instruction "Return 0" at the end of the main.c was the cause ? Thanks
  16. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I also think that a basic requirement of a bicycle display should be ease of reading in all conditions. The KT-LCD3 on this I believe is absolutely unbeatable. I understand that for the memory problem it will not be possible to insert all the new functions, but it would be nice to have the basic...
  17. V

    New "TSDZ2 Torque Sensor Central Motor"

    Hi guys, sorry, maybe the topic has already been treated but now there are hundreds of pages and it's not easy to find what you need. I have a strong mecanical play on the crown, the engine is a 48V and will have done 500-600Km I enclose a video ..... Do I have to worry? What can be done ...
  18. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi Buba, installed A8, all ok. The debounce on walk assist in now perfect. :wink: Thanks The eMtb was impoved a lot but ,for me, It Is only usabile in certain situation. :thumb:
  19. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi Buba, it's possibile to have more filtered values in sub-field where it's show the istantaneous Amp absorbed and fill the First character with a symbol like "A" ? I think it's a good thinks fill, where it's possibile, all the first character of any sub-field to improve readibility. Thanks
  20. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi, it's possibile to have more filtered values in sub-field where it's show the istantaneous Amp absorbed and fill the First character with a symbol like "A" ? I think it's a good thinks fill, where it's possibile, all the first character of any sub-field ti improve readibility. Thanks
  21. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    You can flash .ihx whitout change extention
  22. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Ok, installed A6, all work great. DIfference of 0.4V in voltage remains , but i think probably it's an hardware issue because on bikeof my friend (now with A6) the difference remains 0.2V. I dont know if it's useful to provide the possibility of "tune" the reading with a sort of offset defined...
  23. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Ok, I'll try on the next ride, and absolutlely yes, it would be better be explained in the wiki
  24. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    On the display the temperature reported was about 26°-28°
  25. V

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Ok, thanks, this is a good hint because only 5° of difference between Max and Min it did not allow the engine to manage the power supplied progressively but it quickly got me to the assistance stop at the half of the hill I had set 600W of maximum delivery power.
Back
Top