Search results

Date Relevance Most replies

  1. S

    VESC configuration and brake button SK3 6374-192kv

    up
  2. S

    Goped ESR upgrade - TURNIGY 6374 build

    thanks.. Problem is that I have a nice 6s charger so I will have to stick to 4s lipo btw - I wanted to go with 3*4S = 12S total but not sure if this motor will handle this voltage. Motor max voltage is 44V, 12s lipo just charged are 12*4.2= 50.4V :cry:
  3. S

    VESC configuration and brake button SK3 6374-192kv

    TY very much! Still not clear for me how to connect 2 pin button to ADC 6pin port: 1 pin to TX and another pin to 3.3V or GND? :shock: :oops: My thottle is connected to pins: 3.3v, GND, ADC_EXT I did a detection and set up everything according to tutorial :!: , but there are still a lot a...
  4. S

    VESC configuration and brake button SK3 6374-192kv

    up
  5. S

    VESC configuration and brake button SK3 6374-192kv

    up
  6. S

    VESC configuration and brake button SK3 6374-192kv

    Hallo! I need help with VESC setup, I google a lot but cant find any similar questions My setup is Turnigy Aerodrive SK3 - 6374-192kv + VESC + 8S LIPO 16000mah 1. How to make brake button work? My throttle is usuing @ADC and works perfect, no issues here. As I understand button is a @PPM app...
  7. S

    Goped ESR upgrade - TURNIGY 6374 build

    Ok, so today I did a first long run Charged lipo to 4.2/cell and did a 7.63 miles on full throttle. And still 3.9 left in cells so I believe I can make up to 12 miles before voltage reaches 3.7 Motor is warm, esc is warm, nothing is overheating. Happyyyy :mrgreen: :mrgreen: :mrgreen:
  8. S

    High Amp Master Switch

    whats the problem to solder wires to a pin? 60+watt iron and 3 sec to solder Just dont forget to use flux otherwise you will burn plastic on connectors ps I use Rosin Paste Flux #135 for $8.49 and Weller SPG80L Marksman 80 Watt Iron for $26.60 12V 200A should work with goped 32V80A setup but...
  9. S

    Goped ESR upgrade - TURNIGY 6374 build

    MrDude_1, can u check out this scheme? Im not good at electrical at all, but.. Its the scheme where I can isntall parallel board into my goped and just add an extra connector on its body to jump charger without opening the cover Is this scheme correct?
  10. S

    High Amp Master Switch

    I think his ESC has option to turn on/off depending on voltage in some logic circuit. Like a signal wire in car audio.. So basically his ESC is always connected to battery but due to logic circuit in ESC it turns itself off
  11. S

    Goped ESR upgrade - TURNIGY 6374 build

    honestly - I have no clue how to make it charge without opening the board and disconnecting the circuit 2*4s lipos and in series, to charge them I need to plug them to parallel charging board, disconnect stabilizing wires from low voltage meter and also plug them in parallel charging board...
  12. S

    Goped ESR upgrade - TURNIGY 6374 build

    To turn goped on and off I did an arming switch without going into expensive 100A relays (over 100$) 2 connectors, 2 inches of wire, 1 hour of time and a couple bottles of the best Oregon beer)
  13. S

    High Amp Master Switch

    So.. I ended up with "custom" connector switch The only problem here that it sparks a bit when Im inserting "the key" But.. since Im not usuing goped a lot - I think it wont make any problems
  14. S

    Goped ESR upgrade - TURNIGY 6374 build

    When I was going short downhill with a full throttle (may be 25mph) I did feel how unstable the scooter is. Every mini nano bump on a road makes me feel unsafe)) Especially when cars and trucks are around or right behind and you know that they cant stop as fast you fall)) I think its all about...
  15. S

    Goped ESR upgrade - TURNIGY 6374 build

    ohh thanks for the info right now at 20mph motor is warm not hot.. but at 30 it can be hot, even with my 130lbs do u think 25mph is going to be good? its 56/14 gearing and gear ratio is 4:1 also I saw someone added a fan to the motor from the side p.s. I dont think it safe to go 37mph even...
  16. S

    Goped ESR upgrade - TURNIGY 6374 build

    After all I ended up with VESC ESC, 6374 192kv motor, 2*4s 16000mah = 8s total 32000mah 31v and gearing 56/11 and got 20mph at 1st run Motor mount was done from homedepot steel plate for 2$ that fits perfectly from tools I used only dremel and drill Now I want to change motor sprocket to...
  17. S

    High Amp Master Switch

    what about this one? I have a goped scooter project so i have a lot of space left under the deck
  18. S

    High Amp Master Switch

    Can anyone explain why 110v 50a circuit Breaker wont fit here? they are under 10$ and can handle 5kv
  19. S

    High Amp Master Switch

    just checked.. Crydom D1D60 (100a 100v) 130$ OMG :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
  20. S

    High Amp Master Switch

    I think I'll jsut use extra 9v crone battery for it
  21. S

    High Amp Master Switch

    Thanks guys! Wanted a more budget decision but looks like ssr / crydom is the only way to go... what about other questions: 3a. I have a lipo low battery beeper/voltmeter for 8s battery, it has 9 wires - 1 ground and 8 for lipo cells both my batteries have 5 wires ea - ground and 4 for cells...
  22. S

    High Amp Master Switch

    Hi everyone! I have some stupid questions - what type of switch is it better to use for high Amps? 80-100a (3kV) I have 2*4s lipos, 30v total motor max current can be under 100a I need to install switch to turn on/off the scooter.. otherwise I have to unscrew board every time to plug connectors...
  23. S

    High Amp Master Switch

    Hi everyone! I have some stupid questions - what type of switch is it better to use for high Amps? 80-100a (3kV) I have 2*4s lipos, 30v total motor max current can be under 100a I need to install switch to turn on/off the scooter.. otherwise I have to unscrew board every time to plug...
  24. S

    Goped ESR upgrade - TURNIGY 6374 build

    Thank you very much! Tons of info!! Will 6S + TURNIGY 6374 + EZRUN/XERUN/FVT give me 25-30mph and good efficiency? VESC is sold out till November, what else can I go? .. CASTLE CREATIONS? I was expecting to spend around $100 for ESC... I have a 30W iron and 1500w heat gun, should be enough...
  25. S

    Goped ESR upgrade - TURNIGY 6374 build

    Hi, I need some help with my build.. Its my first build so I have some strange questions)) Planning to go 25-30mph and 10 miles range or so Motor: Turnigy Aerodrive SK3 - 6374-192kv Brushless Outrunner Motor ( no hall sensor installation, Im not ready for this) Lipo choice: (need help)...
Back
Top