Search results

Date Relevance Most replies

  1. Killer-B

    Bafang Ultra, Phaserunner + CA with custom frame

    I use to get my motors up to the 90 threshhold, or 110, I added ferrofluid , or statoraide, whatever its called and now I see my temps usually around 70 degree, there are a few fids on how it works out there on the Grin videos tab
  2. Killer-B

    GNG / CYC X1 Pro 3000w

    is there a coupon code for the cyc site?
  3. Killer-B

    Grin's weight sensing electric longboards #4 and 5, and kit!

    I would definitely be interested in this. :bigthumb:
  4. Killer-B

    Cycle Analyst V3 preview and first beta release

    As always comb thru your wiring make sure all is connected right . Throttle in should e around .89 and 4.02 for the in.. throttle out should be around .95 an throttle max say 4.20. sometimes my indicator does the blip thing at wot. I twist throttle a few times and it goes normal.. I am sure AW...
  5. Killer-B

    Compact Field Oriented Controller, ASI + Grin, limited run

    Have you looked at the switches from ebikes.ca, I have one of them wired into the white and yellow wires coming outta the heatshrink on the throttle connector on the PR.. Works like a charm!
  6. Killer-B

    Cycle Analyst V3 preview and first beta release

    looks to me like you have a wire flipped and the ca is blipping because its shorted
  7. Killer-B

    On/Off switch for 22S

    I always use Grin Ebikes.ca switches. I run at 89.1 .. Its a nice small one with waterproof housing cap/plug. :thumb:
  8. Killer-B

    Kelly KLS-S: Troubleshooting

    tying to gets answers about xt90 anti park connectors... do I need all the other crap Kelly sends with there controller . dode and breaker!! I got no room,.. wont an xt 90 due the same task essentially
  9. Killer-B

    Compact Field Oriented Controller, ASI + Grin, limited run

    I run my regen at 45 amps . I have a samsung 25r pack 20s5p . regen battery cuurrent should be set to your nominal battery voltage.mine is at 74 Yours you could try battery current at 59 and your regen at around 30.
  10. Killer-B

    Compact Field Oriented Controller, ASI + Grin, limited run

    I lowered mine .0 and do the regen thru holding brakes and twisting throttle for proportional , works great,
  11. Killer-B

    Cycle Analyst V3 preview and first beta release

    I am also having an issue with the new download, when I start assist with peddling it goes up to 2000 w If Ihold brake for a second then peddle its very smooth. but again forget to apply brake first and it overshoots and get all aggressive.? I did not notice this before ? i should mention assist...
  12. Killer-B

    Cycle Analyst V3 preview and first beta release

    Hi there Just a guess but if your getting the S flag that should meant that your speed limiting is in play. Check your set speed settings and adjust accordingly.
  13. Killer-B

    Basic BMS question-no separate charge/load terminals?

    Hey there As far as my knowledge takes me, there should be no problem hooking positive and negative parallel. But do some more research, this forum is loaded with great information. Regards Killer-B
  14. Killer-B

    Cycle Analyst V2.3 Standalone Shunt Resistor

    The stand alone shunt resister from Grin is 1 OHM. Regards Killer-B
  15. Killer-B

    cycle analist pas settings

    hi what settings habe you changed, you need the pole count to be right and your whatts set to shat you like , maybe 200wthen it should be less agressive, If you add the aux swith it makes changing assit levels on the fly so easy. regards Josh
  16. Killer-B

    SOS! Anyone in toronto have extra nickel strip?

    Im near Toronto ,guelph area I have a kg ofit on a roll if you still need
  17. Killer-B

    Kelly controller phase wire matching. "Help please"

    I am now having the same issue with my ksl S 7230, ill be tryin till I'm fryin
  18. Killer-B

    Best 18650 battery for the buck? Best deals?

    Just thought Id pop in and say Hi. Ive built many of my own 18650 pack. Latest is 24s 6p.. id be happy to help others in my area.Ive got a good cell hookup and the welder Guelph Ontario Canada
Back
Top