Search results

Date Relevance Most replies

  1. A

    Cyclone motor and full suspension - Where to mount?

    I ask this in regards to my enduro ebike frame. It is important to note that the swing arm moves on a different axis than the bottom bracket. The center of the BB is about 3 inches from the swingarm axis. Currently the motor is located in the battery bay of the frame. Its mounted to thick...
  2. A

    Am i as dumb as i think I am? Blown controller?

    Tldr: shorted display power circuit, can i fix it (45a hallomotor controller) Lesson learned, dont assume you know how to wire a controller So i just recieved a hallomotor 45a controller (says risun on the label). I was super excited to connect it to the motor and might have done something...
  3. A

    EBB FRAME + CYCONE build thread

    I edited my post. I think i overated my need for sustained high speed. I only went full throttle with my bsshd in two spots on my commute, on spot is slightly up hill maybe 1 or 2 degrees and i would hit 31mph and maintaintain it on the slight incline. The other spot is the super steep hill i...
  4. A

    EBB FRAME + CYCONE build thread

    also thought provoking, Ill do some window shopping and think of things I could sell to make up the cost. Horizontal drops unfortunately, it was the only frame with a swingarm that fits the alfine, but now I need a tensioner
  5. A

    EBB FRAME + CYCONE build thread

    I wasnt clear, for testing I will start 35a but when the dual drive train is in effect I will have it at 52v x 40a for 2kw. Yes single ratio. Realized the trade off, but I have really come to appreciate keeping the bulk of the weight low and centered from front to back. The gears would...
  6. A

    EBB FRAME + CYCONE build thread

    good tips. I live in texas, heat will be a issue, though I typically work at night. should also mention my main job right now is delivering pizzas on ebikes for Dominos. So much fun!! They provide radpower bikes (highly recommend for a first ebike) but I used my own my bike before it was...
  7. A

    EBB FRAME + CYCONE build thread

    POST 1 Jan 6 2021 Goals of the build: Over-engineered, I will commute on this bike Ability to maintain 35mph for extended periods ^^^^Edit - be faster than my bbshd 26er build. Id hit 32mph on flat. Bike weight 50lbs + my skinny ass at 130lbs Inventory: 1 Enduro EBike frame with suspension...
  8. A

    Left side belt drive with alfine 8 and disc brakes... Possible???

    hehe no problem, but yes that is what I am looking for... again a cyclone product but I dont see that adapter on their site.
  9. A

    Left side belt drive with alfine 8 and disc brakes... Possible???

    Hey folks, Building a mid-drive EEB frame powered by a cyclone motor running at about 2.2KW. I want to have two separate drivetrains, on the right side will be pedals only driving the cog on my alfine 8. The second drive train will be on left and belt driven to prevent contamination of my...
  10. A

    Dual battery question

    Im building an eeb frame up and realized the frame could actually hold 2 battery packs i own. More than increasing range i am theorize that it should also cut the max draw of each battery in half. The last purchase i need for next project, working title "2 Chainz" a cyclone eeb build, is a...
  11. A

    Bbshd 68mm with extras - $400 - usa, will ship

    Selling used bbshd 68mm kit Includes: Bbshd motor 46t luna eclipse ring Luna throttle grips in black C500 color display Bafang b/w display (forget the model) About the motor Approx 3000mi. Stator replaced at 1500mi along with gaskets Regreased every 1000 mi with mobil airplane grease. Will...
  12. A

    52v li-ion battery cutting out at 49v, am I missing 40% of capacity

    I am glad I made this post and you have been especially helpful tek. The key thing I did not understand was that I needed to leave the battery on the charger for hours even days if possible in order to balance a badly out-of-whack pack. I was always in a hurry to discharge the pack after...
  13. A

    52v li-ion battery cutting out at 49v, am I missing 40% of capacity

    Thank you for this. I did mis-speak about "shallow charges", i meant discharge. I would charge to 58.8, ride to work and plug it back in when i get home at about 55/54v back up to 58.8. I would unplug as soon i noticed green light. I assumed it was done as i use a luna charger. Once it reaches...
  14. A

    52v li-ion battery cutting out at 49v, am I missing 40% of capacity

    Also what to you mean "turn everything off and back on again to reset it"? I have a BBSHD with C695 controller and my battery has no switch. So when the battery shuts off, everything is already off and my system won't power up.
  15. A

    52v li-ion battery cutting out at 49v, am I missing 40% of capacity

    Yes the display goes off. Im not super excited about opening the pack. I really think I may try and convince the builder to let me buy another one and I will ship this battery back once I have the new one and confirm in operates as advertised.
  16. A

    52v li-ion battery cutting out at 49v, am I missing 40% of capacity

    New to ebikes here but have been doing lots of reading. I have searched for similar problems but cannot seem to find anyone with the exact same issue. My 52v 20ah li-ion battery was purchased about a month ago. On my first discharge cycle the bike cut out earlier than I anticipated and...
Back
Top