Search results

Date Relevance Most replies

  1. A

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    PITMIX Great, I will connect it today. I am glad that such a small panel is possible to integrate with Nucular :)
  2. A

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    I am glad that you like my drawing, especially that it was made on an iPhone which was not easy :) can you answer this question? If not, it is pointless to fill the post with empty content without meaning. Thank you.
  3. A

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    If I connect this 4-button panel, can I configure it to work: Button 1: Speed Mode 1 Button 2: Speed mode 2 Button 3: Speed Mode 3 Button 3:direction of motor rotation Forward/Reverse But I would like it to be possible chose function with a short press so that I don't have to hold the button...
  4. A

    Sur-Ron - New Mid drive Bike

    What is the P3? I have a problem with a 2020 Surron that is an electronic throttle. In the past it turned on correctly meaning the display said P1 and then E2. Since yesterday it displays P1 and then P3 and the throttle does not work. No other errors are displayed. Any ideas?
  5. A

    GNG / CYC X1 Pro 3000w

    70 or 140 if you put them in 2 rows.
  6. A

    GNG / CYC X1 Pro 3000w

    I'll start with myself. I've had GEN 2 for a few days now. My bike is downhill Mondraker Summum 27.5' whell. I have a 52V 17.5Ah Sanyo GA 840Wh 14S5P battery. The rear gear is dedicated for electricians Sram EX1 / 11-48s, in front I had 11/63T with a 38T sprocket but I changed the sprocket to...
  7. A

    GNG / CYC X1 Pro 3000w

    A request to people who have had CYC Motor for a long time or have more experience. Could you share your CODE SETTINGS by adding them to this thread? The next people could add something from themselves and together we will create better settings. I know we have different drives and different...
  8. A

    New "TSDZ2 Torque Sensor Central Motor"

    Dear casainho I was just on a test drive and I think I know what's going on. The problem comes when I hold up and turn on the lights. Then it stops reacting. When I turn it off, it goes back to normal. Connect the lights directly to the battery and there should be no problem. At the same time...
  9. A

    New "TSDZ2 Torque Sensor Central Motor"

    I want to go for a long ride with my little son tomorrow, so unnecessary stops are not advisable :-) So far I've been using the stable version 0.19.0 + Bafang 850C but I'm having problems with the engine overheating and I need to have a temperature preview showing the current exact value - that...
  10. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Unfortunately, due to the epidemic, getting any 850C in Poland is not possible :( So it is not possible to upload new firmware versions to older 850C (TFTGDV4A60 HHY.100 V5.2 201709142025)? Then which last version will be possible to install on this old display?
  11. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I have two displays: - older 850C (TFTGDV4A60 HHY.100 V5.2 201709142025) - newer 850C (TFTGDV2.3CL60 HH2.0 V5.2 20190506 0104). I can easily upload any custom firmware to the new 850C. I use bootloader to upload. I can't upload any of the newer firmware (v0.7.0, v0.6.0) to the old 850C every...
  12. A

    New "TSDZ2 Torque Sensor Central Motor"

    Did any of you combine the TSDZ2 with the drive system Sram EX1 used in the best Bosch motorized electric bikes (Cube, Hibike)? Sram EX1 dedicated to electric bikes with a special thicker chain and 8-row 11-48T cassette, gears can be changed even under load...
  13. A

    SRAM EX1 what chainwheel chain ring for non-bosch engine?

    I bought a complete set of SRAM EX1 (rear sprocket, derailleur, chain, shifter) for TSDZ2 motors: https://www.sram.com/en/sram/mountain/series/ex1?filters=&sort=Relevancy&page=1 Normally the front sprocket for these sets is with a Bosch engine: https://www.sram.com/en/sram/models/cr-xsnc-bos-a1...
  14. A

    New "TSDZ2 Torque Sensor Central Motor"

    I have an 850C display, but I want to look on the wiki, thank you.
  15. A

    New "TSDZ2 Torque Sensor Central Motor"

    Casainho - So finally you showed us the reason why you are doing such cool custom firmware - it is your son with whom you have great fun on bikes :-) Unfortunately, it is not possible to mount the front derailleur to this frame, because there is no way to screw it. To install the TSDZ2 I will...
  16. A

    New "TSDZ2 Torque Sensor Central Motor"

    I'm starting to adapt the third bike for TSDZ2, of course under Custom firmware. It will be the 2015 Mondraker Summum on 27.5 inch wheels, a downhill bike: So far I've made two such constructions for wife and kid: My driving style is very aggressive, at full speed in the mountains and in...
  17. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    It's great that you're working on it! On our Polish electric bicycle forum: https://pojazdyelektryczne.org/viewtopic.php?f=25&t=2599&p=53708#p53708 and YouTube channels there is a lot of interest in your soft, I think that more and more people will decide on TSDZ2 + your firmware. Good luck!
  18. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    I checked, you can see the temperature on the graph. But as you said, if you have a histogram from a long trip, you don't know very well what the current temperature is. If you drive in the mountains, an indication of the temperature as a number would be great. Example: 1. You are going...
  19. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    thank you. I didn't notice this topic in wikipedia. I have another more serious problem with the temperature sensor installed. On LCD3 it works very well, but on 850C the temperature is not shown, I showed it in the video below: https://youtu.be/Jg81CbfcDCc
  20. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

  21. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Is 850C control described somewhere? 1. How to display the current Watt battery or the current engine temperature on the main screen? 2. Which button change the chart from "human power" to "wheel speed" and other charts? 3. Can I change the items displayed in the main MENU? or switch between...
  22. A

    New "TSDZ2 Torque Sensor Central Motor"

    great, could I ask you to show more pictures especially on the side of the bike, so that I could understand how exactly you screwed it together? Did you have to modify the derailleur? How does it work for you?
  23. A

    TSDZ2 which fuse should I choose?

    thanks for the answer an hour ago I soldered this temperature sensor :) but after turning it on in 850C settings I do not show the temperature measurement even though I turned it on in options. Is it possible to view the temperature on the main screen at 850C? Mega recognition for creating...
  24. A

    New "TSDZ2 Torque Sensor Central Motor"

    In my TSDZ2 I need more speed on flat sections so that I can catch up with my colleagues with Bafang drives :-) On the back I have 11-42T. 110BCD DOUBLE CHAINRINGS seems to be the solution. I don't want to be slanting the chain and doing a problem with the front derailleur that won't reach that...
  25. A

    New "TSDZ2 Torque Sensor Central Motor"

    Is version 0.20.0 firmware available yet? On github I see only 0.19
Back
Top