Search results

Date Relevance Most replies

  1. Z

    New TSDZ2 Open Source firmware with Bluetooth interface

    Hi Mspider65, I installed the new updates and everything works great! :D
  2. Z

    TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

    "by winwar84 » Jun 02 2020 5:36pm http://www.jobike.it/forum/topic.asp?TOPIC_ID=78456 the sensor is managed by the bluetooth card" Hello, it is possible but you have to install the TSDZ2-ESP32 card of the Mspider65 project, the discussion can also be found here...
  3. Z

    New TSDZ2 Open Source firmware with Bluetooth interface

    Hi, then yesterday I got the PCB that Mspider65 sent me which I thank for the great availability and courtesy, today, after identifying the corresponding colors of my controller compared to the standard ones found in the project wiki, I connected and installed with the help of my trusted...
  4. Z

    TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

    Good, place the link where to find the latest stable version for the display LCD3 V0.20.0-beta.1 of Buba-Casainho https://github.com/OpenSource-EBike-firmware/TSDZ2-Smart-EBike/releases/tag/v0.20.0-beta.1
  5. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hi Famichiki I tried to change the value as recommended by you and I got excellent results, I reported my experience on jobike, also because I use 152mm short cranks and with the calibration of the force applied on the torque sensor everything works much better
  6. Z

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi jalabat, very nice your test I already use the high cadence mode on the engine powered at 36 and I am very satisfied, I saw on your video that when you go from 42V to 58.8V you only change the 14S battery type, but not change the motor settings (from 36V to 48V) why? when you use a native 36V...
  7. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I'm sorry stancecoke, but I just broke the news.
  8. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hi, great news the latest release of Mbrusa works perfectly with all the original Displays :bigthumb: http://www.jobike.it/forum/topic.asp?TOPIC_ID=76426&whichpage=55...
  9. Z

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi Buba and welcome back :D , I'm using it and I didn't have any wonderful work problems, I noticed though that the LCD3 actually measures the battery voltage a little higher than that measured by my WattzUp instrument, a problem that was also reported from another user here...
  10. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Thank you very good work :bigthumb: , given your competence, if you like updates of Mbrusa to the SW of Marcoq on the display on the original displays of some data (temperature, voltage etc.) you can take a look? because it works on XH18 but they are not displayed on LCD6, only the remaining...
  11. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    It works perfectly for XH18 :D . Thanks again to Mbrusa for his work :thumb: , the user from here Ashambro has also tested it and displays: - the engine temperature - the remaining battery charge in percentage - battery voltage but not yet for VCLD6 and VCLD5 :( , who can help develop these...
  12. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Thanks Btslo :D
  13. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I am following this discussion and have never had the problem in restoring the original SW, but for knowledge I wonder where it configures openbyte to 28? I haven't seen it in any guide.
  14. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hello Marcoq, I look forward to trying it :D , but you have also updated to ver. 0.20.1 of Buba because I tried it and it's fantastic! :D :D
  15. Z

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi, I've updated to ver. 0.20.1 Beta and tested for a standard lap that I often do, I can say that having tried all the ver. starting from 0.07. this is the best, the response of EMTB is great, thanks Buba and congratulations. :bigthumb:
  16. Z

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi Casainho, why don't you consider the "Lingbei MM28.250" engine https://endless-sphere.com/forums/viewtopic.php?f=28&t=94220 Who owns the same hardware as the Bafang, uses the same displays and has the integrated torque ?, I understand that it does not start from 1000W but I think it supports...
  17. Z

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Great job Buba, I look forward to try it.
  18. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Brobro you must load Marcoq's SW only on the motor.
  19. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hi Marcoq, why should it not work? I believe that the SW of the TSDZ2 is the same I think they have only adapted the connections ... of course the keys to configure the options may not match, Wpenner since you have the opportunity to test why you do not install it and so we check how it was done...
  20. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    ok Demion thanks, then it's similar to the SW of Marcoq.
  21. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hello Demion, meanwhile congratulations for your work :thumb: , can you be more clear on the functioning and configuration of the parameters inside config.h, and also, the option without display means that you can use the bike without a display with a standard configuration? how do you turn on...
  22. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    The user Ashrambo has a very interesting blog about how to install and configure the Marcoq SW: https://ashthinkings.blogspot.com/ Also on the Italian forum you will find something prepared by the user Bic3r: http://www.jobike.it/forum/topic.asp?TOPIC_ID=77830 Good job.
  23. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hello, I report, translated with google, a guide to programming some time ago taken from a post by Marcoq: "how to use the Configurator in Java. First of all, what is needed: - Install JRE runtime on the PC. - Install the SDCC compiler as explained by casainho here...
  24. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Sergio1990 the link is on the previous page.
  25. Z

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hi Sergio1990, the Marcoq code already provides for the elimination of backward resistance using the "Backwards Res. Off" option and works well confirmed by many users. Keep in mind that the latest version of Marcoq can use Casainho's SW 0.19.08 which has also eliminated backward resistance.
Back
Top