Search results

Date Relevance Most replies

  1. 29a

    Cell -log help

    Hi guy's what are you guy's using as a replacement to the discontinued hobby king cell-log's. A link would be appreciated
  2. 29a

    axle replacement

    Hi all, Anyone around Toronto got access to a ten+ ton hydraulic press and would be willing to swap out a 400 series axle. Has anyone here done this before ? If so any tips ?
  3. 29a

    only full speed on 406

    hi all been a while, I'm riding a 406 with 72V 35A controller all clite parts. First I changed controllers and the same result. The scenario is I plug my batteries in then after about 5 seconds the motor just takes off on full power running normal with no juddering even with no throttle...
  4. 29a

    trike

    Hi all, After a few nasty falls last winter on ice I was thinking of switching from bike to delta trike for the winter. I've never riden a trike and was hopeing someone would let me know how they handle on ice/snow. Of course this will be clite hub motor powerd, so for the trike should i use...
  5. 29a

    hall sensors

    Hi all, I'm trying to test my clite hub motor hall sensors, can anyone let me know how they work :?: When fed 9v on black+red and activate (by magnet) do they stay on giving the 14V output untill another sensor is activated to turn them off :?: Do they stay on only when magnetic field is...
  6. 29a

    48V/35A brick controller

    Need help :!: I blew a controller I don't know how, There is a dead short between bat power leads. I opened it up and there are no visible signs of damage. I removed all the fets = no change. I removed all transisters = no change I removed the voltage regulator = no change I removed all the...
  7. 29a

    ebikes.ca

    I thought this needed a thread of its own :!: xyster said at http://endless-sphere.com/forums/viewtopic.php?t=1021 Non of Justins venders are selling out of their Canadian province anymore I don't know but i suspect that this is an attempt at price fixing as Justin is the only crystalite...
  8. 29a

    increse in efficency

    I got this 406 and it had half the range of my previous 408 same set up but speed wouldn't go over 34 kmh slower than 408. Slowly over time it has improved, today i got my previous 408 typical 48km from same bat pack. A really unusual thing to note is this 406 has no cogging (same resistance if...
  9. 29a

    new controller

    I reliably hear theres a new crystalite controller (with some of Justin + Bobs mods )presently on the water in transit here. Anyone know anything :?:
  10. 29a

    reducing amps

    Hi all, Due to a batt failure i'm gona have to run at 48V 24A for a while :!: I see lots of threads on increasing current, but nothing on reducing current. Edit:- sorry found it BUT Am i right if i snip one of the shunt wires i will be at 26A :?: Is that close enougth for 8Ah 3C Nicd :?:
  11. 29a

    48V 16Ah

    I went with Nicd because they last longer (get to cycle them more times), or do you :?: what causes this :?:
  12. 29a

    reverse crystalite controller

    I think this is a gray area for a lot of peeps like me, could someone please explain what the controller does from input to end component to component (plz number parts) test point voltages/ohms would be a real plus Allso along the way any improvments you think should/could be implemented to...
  13. 29a

    lemon

    Is this normal on a 408 IS or do I have a lemon. I've done less that 500km in 6 weeks (more down time than up), I'm on my second controller,one set of batts has packed in, now the bearings in the wheel collapsed allowing the spindle to move off center irreparably shorting the windings. What...
  14. 29a

    Tire probs

    Hi Guys I just got my bike up + running but i notice the tyre on the 26 crystalite wheel is being pushed completely out of the rim (at the bead) by the tube valve (Schrader) simply because the dam valve diameter is too large to fit in the "V" of the rim. Ive allready tried diff tyres/tubes all...
  15. 29a

    torque arm

    Hi guys anyone got any info/advice/links on front torque arm design. 48v/408/35amp/MTB
  16. 29a

    controllers

    I don't understand what i'm looking 4 in a controller. R the ratings (20/30/40 amp) the current limit (suppressing current through) or r they the current rating (the current the components can haddle) +how does this relate to motor or am i totally off track. I'm specifically looking at pheonix...
  17. 29a

    which hub motor

    Hi guys Im ready to order my first conversion kit, I was going to go with a crystallite 408/4011 dual speed http://www.evsolutions.net/kits.html#2speed 48v 13 ah NiMH But i notice the controllers 4 dual r only rated at 20 amps. Do u guy's think i should give this a miss + go with something like...
  18. 29a

    weight

    I was wondering what bikes + what systems u guys r using + what the total weight is :?:
  19. 29a

    who killed the electric car

    Found this interesting http://www.sonyclassics.com/whokilledtheelectriccar/ It,s probably old news but it was new to me :!: Anyone got any info/links :?:
  20. 29a

    very basic links

    heres a couple of links that helped me out as a noob its old/incomplete/outdated info but usefull http://www.atob.org.uk/questionselectric.htm http://www.ebikes.ca/batteries.shtml Im sure its not 100%accurate so plz feel free to post corrections/comments or better links :D
  21. 29a

    basic questions

    Hi all been looking into e bikes +there isn't much in the way of reviews anywhere,+ no set way of comparing system to system, so confusing to me. Heres the best info link ive seen http://forums.batteryspace.com/forums/viewtopic.php?t=3098 has anyone had any experience with the crystalite...
Back
Top