Search results

Date Relevance Most replies

  1. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Ignor the last comment just realised that is motor type. Is there a good basic setup known to work well to start with ?
  2. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Just setup the new configurator but noticed there is no option for 52V. Is there a work around for this ? Daniel
  3. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    It has been a while since I have been here. I have now done around 1300km using the OSF with VLCD 5 on my Cannondale Scalpel and overall it is very good. I bought a Cube Reaction Pro with Bosch motor for my wife recently but she prefers my bike :-) . With the firmware, power level 3 (emtb) does...
  4. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Thanks, I thought I read that it would / might be possible to do it without cutting to make the swd connection soon. Have I read wrongly ?
  5. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Got my SW102 from pswpower today. Do I still need to cut it open to flash / update bootloader and firmware or can it be done via bluetooth. Recall reading that bluetooth was on the way.
  6. D

    New "TSDZ2 Torque Sensor Central Motor"

    I ended up installing standard 52v firmware and was able to get it to work by connecting blue to red. The power seemed around level 3 but default 25km speed limit was in place. I tried connecting the LCD again and adjusting the speed then removing the LCD but the result was the same. I ended up...
  7. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I ended up installing standard 52v firmware and was able to get it to work by connecting blue to red. The power seemed around level 3 but default 25km speed limit was in place. I tried connecting the LCD again and adjusting the speed then removing the LCD but the result was the same. I ended up...
  8. D

    New "TSDZ2 Torque Sensor Central Motor"

    Did some testing today and found gatorseans information was correct for my motor however connecting red to blue will not power the motor. I tried connecting red, blue and black to the corresponding wires on the LCD and although the LCD would turn on still no power from the motor. I had to...
  9. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I have been trying trying to run a new TSDZ2 with no display, have flashed firmware and settings using the configurator with default emtb mode. I thought is was as simple as joining the blue battery + V wire to the red Vin wire but dies not work.
  10. D

    New "TSDZ2 Torque Sensor Central Motor"

    Anyone here had any success running the TSDZ2 without an LCD ? I have been trying but no luck as yet. Below is my post from another chapter of endless. Need some help. I flashed the firmware in my new motor today and made necessary settings using marcoqs java configurator. I am waiting on my...
  11. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Did some testing today and found gatorseans information was correct for my motor however connecting red to blue will not power the motor. I tried connecting red, blue and black to the corresponding wires on the LCD and although the LCD would turn on still no power from the motor. I had to...
  12. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I read the motor controller can be enabled by simple connect green wire to white wire and this way there is no need to use LCD here https://opensourceebikefirmware.bitbucket.io/development_tsdz2/About_Tongsheng_TSDZ2_mid_drive_motors--Motor_controller.html So joinging Green P+ battery voltage to...
  13. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Perfect Thank-you
  14. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Need some help. I flashed the firmware in my new motor today and made necessary settings using marcoqs java configurator. I am waiting on my SW102 and have read that you can power the motor by joining white to green. I gave the 8 pin plug from the motor the chop and joined the white and green...
  15. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Does anybody have the pinout showing colors for the plug on the SW102 to save me cutting my loom open ?
  16. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    https://endless-sphere.com/forums/download/file.php?id=262134 Thanks that is just what I was after, will use it when all hooked up.
  17. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I have read "NOTE: the motor controller can be enabled by simple connect green wire to white wire and this way there is no need to use LCD." Is it possible to also adjust the power levels or use the throttle without the display ? I'm waiting on my SW102 and cabling but this might get me moving...
  18. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I have previously been using the marcoq version with the VLCD5 but just purchased the SW102 and cabling to attach to a new TSDZ2. I have found the links to wire and flash the SW102 but cannot for the life of me find instructions on how to use it once done. If someone could please give me links...
  19. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I meant to take a photo before I put the motor in however the news is it can be done however I went very slowly and it took some time.
  20. D

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Not sure if this is the right place to ask but hopefully someone will point me in the right direction. I've gone to fit a TSDZ2 to an early Cannondale Scalpel and the RHS chainstay is in line with the outside of the bottom bracket. There is a ring on the rear of the case that protrudes about...
  21. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I have just checked all settings and was definitely using the latest 19C version but have had no issues since. My wife has started occasionally riding my bike and I would hate it to happen to her. Happy to share any information I can if it helps. I have purchased another motor which I plan to...
  22. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Pretty sure l used the firmware from the github that stancoke had a link to page 14 l think. I'm away for a few days so will check when l return and update of required.
  23. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I'm using the V19 and 3.7. I tried to duplicate it this morning with no success. The only other thing I recall doing was toggling the light switch on and then off in turbo mode prior to this happening. It was not a bad situation for me but if the battery did not have a switch within easy reach...
  24. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Possibly dangerous in the wrong situation. I was on my way home from work tonight it was dark and the road was wet - no traffic. My headlight has its own battery and I didn't have the backlight enabled on the VLCD5 as I find it to bright and it makes it difficult to see the road . As I passed...
  25. D

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Thanks. I set Street mode to 500w and Max speed of 45kph and l couldn't seem to tell the difference between E03 and E04 in level 1. Heat also seemed about the same getting to around 63°C on my 8km ride home from work using speed and turbo modes. I'm running a small stand alone temperature gauge...
Back
Top