Search results

Date Relevance Most replies

  1. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Thank You very much. :thumb: :)
  2. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Can we ask for compiled version 850c ? regards
  3. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I have disabled assistance w/o pedal rotation. I think and maybe the reason for this is different weight of right and left pedal.
  4. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hello , I set in conf menu torque, it is great, but is little issue, after power on motor unprovoked starts few seconds. FW 1.0.0-beta1.
  5. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi, still is issue in configuration menu in battery current, whatever value I set, after power off and on, it is set at 16A, which explains why motor power is limited to about 750W max. This was on 1.0.0 alpha4, and is on beta1.
  6. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi, why is motor set to max 750W on FW1.0.0-alfa4 ? Also parameters like battery current and field weakening not changes after exit from menu. Battery is set always on 16A, and field weakening is always disable after power off/on.
  7. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I try new firmware again, after repair battery problem, and it is fantastic. Walk mode works like tempomat. :thumb:
  8. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I have no throttle, and no brake sensors, and after 50-100m ride controller cut off power, and unable to power on by the press the button. It returns from dead state after unplug and plug the battery. It happens all times. FW 0.6.8 EDIT: ̶M̶y̶ ̶f̶a̶u̶l̶t̶, configuration cut off was set on 42V...
  9. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I updated yesterday late , now everything works excellent. Thank You Casainho. :thumb:
  10. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Which is corrected, display or motor firmware ?? On github disappeared 0.6.8 bootloader replaced by old 0.6.5 bootloader.
  11. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Flashed firmware 0.55.0, and 850C_0.6.8, and "firmware error". I flash motor and display couple times, and still the same.
  12. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    When I set level factor on 0.12, drive motor current will be 12A ? (576W motor vs my 100W on pedal) ? Is 0,01 factor equal 1A on motor ?
  13. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    New place: https://tinypic.pl/users/redwater Can be used without restrictions.
  14. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Ups. my photos was blocked on fotosik.pl cause of transfer limit ... I'll move it to another server .
  15. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    When programming VIN (orange ) is disconnetcted.
  16. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    850C plug: VIN - orange Rx - white <--- Tx from UART +26-54V - brown Tx - green <--- Rx from UART GND - black Colours from 850C cable ofcourse.
  17. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    My cables: ST-Link USB-UART , I remade this cable to direct power from baterry, because I burn DC-DC converter (my fault, short circuit :bolt: :flame: ): DC-DC Converter was XL6019: link to auction...
  18. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Ok. I make, and share more pictures tomorrow. It is chip parts from e-store (allegro.pl in Poland, its like ebay), USB-UART, and DC-DC XL6019 converter.
  19. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Try XL6019. Works excellent, or get power from battery directly.
  20. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    One more thing, on boot screen is example 50,7V , but on main screen is 51,3V (0,6V above). On multimeter is 50,7V. Best regards, and happy new year 2020 !!!
  21. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I dont know is that issue, but when I try to pull bike backward then motor braking. In 0.19.0 there was no effect like now in 0.50.0.
  22. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi, I updated motor firmware, and display. On my display is not showing motor-firmware version, is "waiting for TSDZ2" and after that shows main screen, without 0.50.0. I cant test ride now, because is snow, and below 0 degrees C. Odometer again reseting after poweroff. Best regards.
  23. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    It was my fault, I write wrong battery resistance parameter to display. Now works well.
  24. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Someting strangle. I ride tomorrow 30 km, and till 29 km display shows always 53V, when reset display , shows 47,5V on the rest, when I ride again showing voltage 53V, when motor stop working show 47V, and when again working show 53V. Its strangle.
  25. R

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Is that possible to do multiple trip times and distance cancelled by user, not reseting when power off display ? Some like Trip 1, Trip 2, Trip 3 .
Back
Top