Search results

Date Relevance Most replies

  1. T

    OSF v20.1C.4-860C SOC% changed overnight

    Thank you, I will try those things and post the results. Todd
  2. T

    OSF v20.1C.4-860C SOC% changed overnight

    My settings are as follows: Text Volts (This is the only thing I changed, from Volts to Watts and back) Calculation Wh Reset at Voltage 58.4 Battery Total Wh 1040 Used Wh 748.8 What it is...
  3. T

    OSF v20.1C.4-860C SOC% changed overnight

    I tried switching to KM, but it did not seem to make a difference. I am just puzzled why it would change overnight. I had powered the unit off when I finished my ride. Put my bike inside then powered up again and all seemed good to get the numbers. Then this morning it had changed the SOC% so...
  4. T

    OSF v20.1C.4-860C SOC% changed overnight

    First off I would like to thank you to everyone that has taken the time to create such a great program. I love it and have been using it for a year now. It has given my Girlfriend the confidence to ride farther knowing she can always make it back home. I hope this does not come across as a...
  5. T

    Around the world on a solar ebike

    Good luck on your trip, stay safe. I will follow the adventure. Todd
  6. T

    adapter cable 860C display to TSDZ2

    Ok good to know Todd
  7. T

    Battery connector TSDZ2

    I use these, not waterproof but a very solid connection. https://www.amazon.com/OOOUSE-XT60-Connector-Pairs-pairs/dp/B005FAPYXS Todd
  8. T

    adapter cable 860C display to TSDZ2

    They do sell the cable separate, just message them and tell them what you want. https://www.eco-ebike.com/products/5-pin-to-6-pin-display-conversion-cable-for-tsdz2
  9. T

    adapter cable 860C display to TSDZ2

    https://www.eco-ebike.com They should be able to get you the right cable.
  10. T

    TSDZ2 860C - Battery voltage displayed is wrong.

    I have the same issue and I am using the Mbrusa version v20.1C.3-NEW and it is also about a volt too high from the stock firmware for the 860c. I read on a thread Mbrusa was going to add code to allow you to offset the voltage. Todd
  11. T

    OpenSourceEBike and 860C display

    You can find the easy to follow instructions here. https://www.eco-ebike.com/blogs/eco-cycles-instructionals/850c-tsdz2-open-source-firmware-bootloader-update-tutorial
  12. T

    TSDZ2 Error 0x2 0x80060b2

    I have gotten a similar message, but only when exiting out of the menu. It requires me to turn off battery and power back on. Everything seems to work fine after. It happened to me yesterday after making changes to the Street Mode settings. Todd
  13. T

    TSDZ2-v20.1c.3-860c(NEW) and bricked 860c display

    That is what I am doing, but for some reason randomly after making a change and hitting menu button to save it will not let me go to the next item. Also I found yesterday while riding that my battery voltage increased while riding. if I stopped peddling it went back down. It only goes up about...
  14. T

    TSDZ2-v20.1c.3-860c(NEW) and bricked 860c display

    I am also using the "NEW" version as well. I just installed it and have only ridden for about 50 miles so far. I too am using the 860c display. The only problem I am having is sometime after making a change I cant scroll up or down to the next item. I have to go out and then back in to make...
  15. T

    TSDZ2 36V 250W Stopped Working

    oops, sorry here is the VLCD5 version https://github.com/emmebrusa/TSDZ2-Smart-EBike-1/tree/v20.1C.1-VLCD5-VLCD6-XH18 This is the recommended version, the newest version has been suspended. Todd
  16. T

    TSDZ2 36V 250W Stopped Working

    https://github.com/emmebrusa/TSDZ2-Smart-EBike-860C/tree/master/releases Todd
  17. T

    TSDZ2-v20.1c.3-860c(NEW) and bricked 860c display

    Do you remember the setting you changed that bricked the unit? I had a similar problem 30 years ago flying model helicopters. If I changed 1 value in pitch curve. if the radio was off and a button was pressed on the front of x-mitter it would put full sub trim in the tail rotor. If I lowered...
  18. T

    Is it possible to reupload 860C display stock firmware?

    FYI I spoke with the company I purchased my kit from with the 860c. And they do not provide the file to go back. But will happily reflash back to stock if you send it back to them. Todd
  19. T

    TSDZ2 860c display, back to oem firmware

    I ordered it with the 860c display. It came with the factory OEM firmware on both the tsdz2 and the 860C. I flashed both with the new mbrusa v20.1C.3-860C-NEW. I tried it the first time today and really like the ability to dial down the assist. This is what the OEM firmware looks like:
  20. T

    TSDZ2 860c display, back to oem firmware

    Forgive me as I have looked everywhere for this. I have a TSDZ2 that have been using now for a few months and love it. I just purchased the programming cables to try the OSF firmware. And before going that way, I am wondering if I can revert back to OEM. I found the files for the TSDZ2 on...
  21. T

    Is it possible to reupload 860C display stock firmware?

    I have the same question. I can't seem to find the OEM firmware anywhere. Todd
Back
Top