Search results

Date Relevance Most replies

  1. A

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    . and as well. Hope it helps.
  2. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Hello. I just got it to work version 12 and change the dev settings on my phone so it uses Bluetooth AVRCP version AVRCP 1.6 (you need to enable developer options on your phone (very easy, google it) to get to this setting, I hope that works for you. This was done whilst powering it using the...
  3. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Hello. Same problem for me, there are some comments through this discussion about BT issues. Do you have an older phone to try, my Android 9 phone finds it without a problem, my Android 13 hasn't managed to yet, but if i do solve it i'll post here.
  4. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Thanks Mspider for getting back to me. :bigthumb:
  5. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Sorry all I didn't see that. 😳
  6. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Anyone, please.
  7. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Hello. Please can someone confirm that these look okay. Thanks.
  8. A

    Is the P860C display same as the 860C ?

    Hello, from what I have seen it works with mbrusas OSF, check the forum and search p860c. I have bought one and will be trying to sort it this week. Hope that helps.
  9. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Thanks for getting back to me, I admit it looks a bit confusing. Can I go back to a previous version by flashing etc or would this not work? Thanks, just wanted to be sure.
  10. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Thanks, would shorting the tx and rx connections appropriately work, I could use a connector on the end of the current one. Thanks (again)
  11. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    :bolt: It's Still alive :bolt: (Sort of) (Sorry Admiralrofl, I don't know about running no display) I have it all wired up and working (on one of the 2 boards I had there was a short between txl and gnd) the other one was fine. I have a problem though. It works brilliantly until I change...
  12. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    :bolt: ITS ALIVE!!!!!! :bolt: Very excited :D :D :D I thought I would share my experience of flashing the board and getting the temp sensor sorted, it's all working but along the way I made some mistakes and I'm hoping by posting them others might be helped. I used this to flash I got...
  13. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Thanks for the speedy reply. :bigthumb:
  14. A

    New TSDZ2 Open Source firmware with Bluetooth interface

    Hello, I'm just about to install this and I was wondering, if I wish to try a different firmware (eg mbrusa's) at some point in the future, would I have to remove the board (I realise the Bluetooth app wouldn't work). Thanks to everyone for all the brilliant help and support on this forum and...
  15. A

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Hello and thanks for the reply, I was running Open source firmware TSDZ2-v20.1C.3-860C-NEW, all was going well, I swapped out the motor and display to a new bike and I think I messed up the new cables. It would power on show the menus but not flash or interact with the motor. Thanks again. Andy.
  16. A

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Hi Erlano, are you saying that the P860C works? My old 860C died so I'm after a new one (as cheap as possible), I have previously flashed using the set up with the USBUART not a USB TTL board, would this still work. So many questions, I appreciate you might not have the answers but it's great...
  17. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello, no you didn't miss it, I bought this and then flashed using the J-Flash Lite software, which you can download from the J-tag site. I did not try to update the J-tag when it asked. It was one hell of a journey to get this done and I still have some bugs, for example now I can link to the...
  18. A

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Hi Woojak. I saw you over at the TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource forum (thanks for the reply to my question), as someone who is moving over to Cas's firmware I was wondering what your thoughts were about it? To me it seems like Mbrusa's firmware is...
  19. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    It worked...I bricked them, or at least i think i did, but then using a J-link clone from Ali express they flashed and are good to go.
  20. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello, would i be able to flash it with a SEGGER J-Link and using J-Flash Lite? Would this be a case of connecting, erasing and then flashing? Thanks.
  21. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Thanks Cas, I have an array of things coming from Ali express including a Jtag. I will feed back as I try the new things to make sure (if it works) this can help everyone.
  22. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello can someone please help me, I can't get it to work.. To put some context to this problem, I'm on my second st-link v2 and i have 2 dongles (bought from Mouser) and I have tried all combinations of them and I have tried as previously mentioned in a post, using the 5v pin instead of the 3v...
  23. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    :bigthumb:
  24. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Thanks Casainho. I'm new to OpenOCD, assuming I have run it and set up as per the flashing instructions, what would the command line be. I appreciate you don't have time to run through every step of this with me, I just want to know I have entered the correct command.
  25. A

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello, I'm getting this error nRF52 device has a CTRL-AP dedicated to recover the device from AP lock. A high level adapter (like a ST-Link) you are currently using cannot access the CTRL-AP so 'nrf52_recover' command will not work. I'm using an updated STLink V2 Info : clock speed 1000 kHz...
Back
Top