EBike Motors Hub Crystalyte
Go back to Ebike Hubmotors
Contents |
G Series
Crystalyte G Rear weight = 4.05 kilograms (with nuts and freewheel) Probably smallest direct drive motor available. Can be installed into standard 135mm frame with 6-holes brake disk and 9speed cassete without any modification.
H Series
- HT2425 weight 12.60 lbs = 5.71 kilograms
- HS2440 weight 12.88 lbs = 5.84 kilograms
- HT3525 weight 16.60 lbs = 7.52 kilograms
- HS3540 weight 16.38 lbs = 7.42 kilograms
4 Series
- 406
- 408
- 409
- 4011
5 Series
Formatting W.I.P. as of 1/24/2012
Average Weight: 23 lbs (10.4kg) Diameter: Number of turns available 2-6 Stator width: 32/33mm (33mm pre-2008) Stator diameter: Number of poles: 12 Number of Magnets: 24
- 5302
number of turns: 2 number of strands: 10 size of each strand: AWG 20 ( 0.032"dia) All strands = to one 10 AWG inductance between two phase wires: 79uH DC resistance between two phase wires: 0.045ohm
- 5303
number of turns: 3 number of strands: 8 size of each strand: AWG 20 ( 0.033"dia) All strands = to one AWG 11 or two AWG 14 inductance between two phase wires: 0.169mH DC resistance between two phase wires:0.097ohm
- 5304
number of turns: 4
number of strands: 5
size of each strand:
All strands =
inductance between two phase wires:
DC resistance between two phase wires:
- 5305
number of turns: 5
number of strands: 4
size of each strand: AWG 21 (0.029'")
All strands = to one AWG 15
inductance between two phase wires:
DC resistance between two phase wires: 0.142ohm
- 5306
Extrapolation from 5303, numbers may be slightly off.
number of turns: 6
number of strands: 4
size of each strand: AWG 20 ( 0.033"dia)
All strands = to one AWG 14
inductance between two phase wires: 0.338mH
DC resistance between two phase wires:0.194ohm
