Temp proves that show internal air temp and internal winding temp. The shaft is 5/8in bore with a keyway. It has hall sensors internally that work but have since lost the pin out. I will try to dig up the hall connector before the sell. Fan is dead on back could be easily replaced with same size. The motor was spec 48v. Priced to get it out of my garage $75. Local pick up would make the most sense but might be able to get it to fit in a flat rate box for $20 or so. Easily handles 3kw.
- DC814594-1F47-43E7-8565-ECD4B221E3DC.jpeg (4.49 MiB) Viewed 4514 times
- EA051F09-E6AA-48AE-9AB3-EDC27CB4C38F.jpeg (4.17 MiB) Viewed 4514 times
- 537AEBEF-965A-4A0D-B7B2-AAF3E453119F.jpeg (3.76 MiB) Viewed 4514 times
- 927FD0F2-DB2F-4BB6-B904-21AF7D4551BD.jpeg (2.63 MiB) Viewed 4514 times