Search found 2033 matches

by skeetab5780
Apr 24, 2018 3:06 pm
Forum: E-Bike Non-hub Motor Drives
Topic: LMX P2 : Freeride trials motorcycle frame development
Replies: 938
Views: 145864

Re: LMX P2 : Freeride trials motorcycle frame development

Looks like a modern day Voloci! That is a compliment

Sub'd
by skeetab5780
Apr 24, 2018 1:15 pm
Forum: E-Bike General Discussion
Topic: 2018 Mrazek RevX superlight electric freerider
Replies: 16
Views: 959

Re: 2018 Mrazek RevX superlight electric freerider

macribs wrote:
Apr 24, 2018 1:01 pm
Isn't that something. Subscribed. Hope more info follows here as it unveils.
I'm still waiting for my free test bike...
by skeetab5780
Apr 23, 2018 8:03 pm
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

I took one of the bikes out today with a 12s battery thinking that would allow the controls to function and they still do not operate since voltage is too high. The battery was 48.5v when i started and by the end of the ride the horn would work only when under full acceleration(volt sag) I was hopin...
by skeetab5780
Apr 23, 2018 6:41 am
Forum: E-Bike Technical
Topic: What could be wrong with my bike?
Replies: 22
Views: 776

Re: What could be wrong with my bike?

How does the motor spin with no load connected? Just last month someone had a cro motor with the magnets coming unglued. With 12k miles this may have happened. It will sounds rough but still operate for the most part.
by skeetab5780
Apr 20, 2018 10:21 am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

Out of curiosity I had to try out the prototype Zooter bike to see if it worked...and all I had to do was plug in a 10s battery into the andersons it had already and that all she needed was a little juice!! This bike is really neat but its pretty heavy and overbuilt for its power so it will be a sho...
by skeetab5780
Apr 19, 2018 7:10 pm
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

So i attempted to run one of the parts bikes with a large sprocket on a kelly kbs 72v controller. I found the hall combo pretty quickly and it seemed to be working good, i went to take it for a ride and noticed the hall timing must be off since i couldnt hit the throttle after already coasting witho...
by skeetab5780
Apr 18, 2018 10:57 am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

Ok so here is some pics of the motors I have. I am not sure what the smaller one goes too? It looks fairly low power but beefy maybe a xootr scooter? They are brushless with hall sensors though. If anyone has any info on these please feel free to post it up https://lh3.googleusercontent.com/mhxJ1dAN...
by skeetab5780
Apr 18, 2018 9:05 am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

The Voloci uses a lot of Tomos or other off the shelf moped parts. They also have several special parts like frame and seat and swing arm. The front forks are bicycle as are the disc brakes. The controller is custom and the firmware is available on line. There is separate company that made a keyfob...
by skeetab5780
Apr 17, 2018 3:13 pm
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

I was thinking about this a little today. All these parts are regular Tomos brand moped items. Do you think they would work at 12vdc. You would think thats what it steps down to anyway. I will try it out on one of the crappier bikes.
by skeetab5780
Apr 17, 2018 11:22 am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

I had a few moments today to start working on the 48v mod Voloci. It is unfortunate that the accessories do not work on the 48v mod, because it really brings the bike to life and makes it fun to ride with traffic. Maybe they did this purposely so people wouldn't go faster than the moped laws allow. ...
by skeetab5780
Apr 17, 2018 9:39 am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

So I got one of the bikes running today...and I have to say these things are a freaking blast to ride around. I had a EV grin the entire time. All the controls worked perfect still, they have a economy mode and a fast speed that tops out at 30mph. They handle like a complete dream, super safe feelin...
by skeetab5780
Apr 16, 2018 11:31 am
Forum: E-Bike Non-hub Motor Drives
Topic: Kuberg Freerider Extended Swingarm Project
Replies: 116
Views: 9400

Re: Kuberg Freerider Extended Swingarm Project

Here is a quick vid of me testing the controller/motor operation seeing if any error codes occur...everything seems to be working great now. I just got my disc brake lines in the mail so I can fix them once and for all yfw2i9TMuA0 Little rubber gone on the Maxxis now :) https://lh3.googleusercontent...
by skeetab5780
Apr 16, 2018 11:09 am
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

I also have 4 bikes with rear racks, they look cool with them but they make it a tad bit harder to swing your leg over and I rarely use them. They require a different top rail which I have a set of too https://lh3.googleusercontent.com/kG7UPV5m6eWihayW_nZ_D0iayhRg9nQcnbnHXH2kgqkJC8hrPSEWBiJyVe7-8e9b...
by skeetab5780
Apr 15, 2018 12:53 pm
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

Help with a SLA Voloci? Anyone have a stock SLA Voloci that they can post photos of? I am curious about how they connected the batteries to the controller. They have a 50A fuse and you remove the fuse before doing firmware upgrade and other service. Is that the only disconnect for the battery? Wher...
by skeetab5780
Apr 13, 2018 9:26 pm
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

So here is one of the nice stock bikes, other than a sticky throttle and a bent directional it is really nice overall. Like most of the bikes it is missing the batteries, which is too bad. But if we find someone to 3-d print those end covers for us we can figure something out. I have yet to get enou...
by skeetab5780
Apr 13, 2018 8:59 pm
Forum: E-Scooter and Motorcycle Photos & Videos
Topic: Nova Cruz Voloci Re-vamp
Replies: 86
Views: 13072

Re: Nova Cruz Voloci Re-vamp

So im going to be reviving this thread. After the unfortunate passing of Nathan Ulrich i was able to obtain some of his prized possessions thru another party who had already moved the items from the estate. After doing some research it seems he and his brothers had a big hand in the design of these ...
by skeetab5780
Apr 13, 2018 6:03 pm
Forum: Items for Sale - Used
Topic: Voloci E-Bike Liquidation
Replies: 16
Views: 827

Re: Voloci E-Bike Liquidation

I think i have a box of motors for that scooter if anyone has a picture of it i can confirm
by skeetab5780
Apr 13, 2018 7:01 am
Forum: E-Bike Photos & Video
Topic: Vector Light Commuter Build
Replies: 63
Views: 5750

Re: Vector Light Commuter Build

Im planning to put a 52t on the front of mine i will see what i need for clearance soon!
by skeetab5780
Apr 12, 2018 8:14 pm
Forum: Items for Sale - Used
Topic: Voloci E-Bike Liquidation
Replies: 16
Views: 827

Re: Voloci E-Bike Liquidation

Got the stuff today, one of the bikes seems like a very early prototype and it has the xootr brand name and mag wheels..its pretty OG

I will get a detailed list of parts ive obtained on my voloci page when i get around to it. About 5 of the bikes are in very good cond
by skeetab5780
Apr 12, 2018 12:24 pm
Forum: E-Bike Photos & Video
Topic: Vector Light Commuter Build
Replies: 63
Views: 5750

Re: Vector Light Commuter Build

jordison wrote:
Apr 12, 2018 11:04 am
hi.

what bottom bracket would you use if you wanted to use 53t chainring?
needs to be larger than the usual or it will hit the frame.
This one is affordable and will likely give you plenty of clearance
http://sickbikeparts.com/bottom-bracket ... -complete/
by skeetab5780
Apr 12, 2018 12:22 pm
Forum: E-Bike Photos & Video
Topic: Vector Light Commuter Build
Replies: 63
Views: 5750

Re: Vector Light Commuter Build

My day job will slow down after April 17th (taxes), more updates then. Sorry to hijack your thread Skeet No worries, I've been busy with other stuff myself so this bike just gets ridden to the corner store here and there...still performs great I have yet to even deplete or charge the battery pack y...
by skeetab5780
Apr 11, 2018 10:58 am
Forum: E-Bike General Discussion
Topic: 2018 Mrazek RevX superlight electric freerider
Replies: 16
Views: 959

Re: 2018 Mrazek RevX superlight electric freerider

I just wanted to say that this bike is my desktop screenshot background and I just love to stare at it for long periods of time! I really like the adjustable shock mount and the adjustable foot peg positions.
by skeetab5780
Apr 11, 2018 8:28 am
Forum: Items for Sale - Used
Topic: Voloci E-Bike Liquidation
Replies: 16
Views: 827

Re: Voloci E-Bike Liquidation

I finally got in touch with Bill the one taking care of this estate. I am planning on going up there soon to buy this lot of stuff

either tomorrow afternoon or this weekend

I will keep you all posted
by skeetab5780
Apr 10, 2018 3:32 pm
Forum: E-Bike Non-hub Motor Drives
Topic: Kuberg Freerider Extended Swingarm Project
Replies: 116
Views: 9400

Re: Kuberg Freerider Extended Swingarm Project

FYI im pretty sure I will be rebuilding the rear wheel to 18" moto real soon after all this weight addition too