Endless Sphere

Hi Vasiliy I'm interested in your BMS 16s. Can I run 350 - 400a through this? Do you have any advice for doing so please? Cheers I have not seen any schematic yet but I assume that the BMS that will be supplied with these controllers will not have to take over the flow of the current but only to mo...

To get the full (setup)speed with only a little throttle is expected in torque throttle mode, when you don´t have any load. Because you don´t control speed (voltage), you control torque (amps). Very little amps are needed to run at full speed without load. I am curios, are you one of the first to g...

Thank you.
And what about this?
24S Nucular BMS for any kind controller - planned
When will the 24S BMS be available to buy with 24F controllers?

Any news about this?
Thermo Nucular Controller 24F - testing... (approx. 500~600$, ETA middle of 2019)

I keep blowing my lipos, will i reduce the time required to make the weld by increasing their voltage? And there by reducing the heat and stress on the thin aluminum terminals Im currently at 3s and can make a 5s batters from the cells I have left that are not broken (all the same 5ah 75c panther) ...

I keep blowing my lipos, will i reduce the time required to make the weld by increasing their voltage? And there by reducing the heat and stress on the thin aluminum terminals Im currently at 3s and can make a 5s batters from the cells I have left that are not broken (all the same 5ah 75c panther) ...

DunkenKBliths wrote: ↑

Jun 11 2019 9:03pm

Little off topic...but related...

My old B52 will be sharing some space in the garage soon...

1500x500.jpg

Impressive
Bets e-bike and best electric car in your garage
Tell us some more .... are you getting a performance model with 4WD?

sn0wchyld wrote: ↑

Jun 05 2019 8:25am

All the cell level and pack level voltages are set very conservatively (ie low) at around 3v a cell,

You should explain some more what does it mean or post a picture of the BMS setup

Skaiwerd wrote: ↑

Jun 04 2019 7:10am

East coast rules.

Basically ride anywhere no one cares. Blank stares or ignored most of the time.

Hummm, here in West cost of Tuscany I would say also pedaling no more than 30 mph nobody care of you.
Is it ok at any speed for you?

StudRock wrote: ↑

May 19 2019 6:43am

I need a new seat and I want to try something like you have. Can you tell me where I can find it?

The temperature was pleasant around 12 °C

last Saturday with a friend of mine who has a mid drive e-bike I took the longest trip ever with the Bomber. 20190511_172604-2.jpg I did 35km off-road but the slopes of the hills near Pisa are 30km away from home so I covered 60km of transfers and I arrived 5km from home with the battery exhausted. ...

This stuff works fine for me. I have already avoided the walk of shame a couple of times. https://www.amazon.it/gp/product/B006GQ41DY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Now I always have some of that stuff inside my tubes :wink: Thanks BB, I use slime in my tubes, but it was 2 years o...

I'm going to give this a go. I think lack of responses means that nobody sees any issue with it and I'm not overlooking anything. To make the question more simple, would anyone see any issue with having the max-e main battery wires connected to one battery, while having the BMS connected to a compl...

This stuff works fine for me. I have already avoided the walk of shame a couple of times.
https://www.amazon.it/gp/product/B006GQ ... UTF8&psc=1

Now I always have some of that stuff inside my tubes

I can imagine it was a special day to get together and to meet other ebikers! Could they keep up following you with the weaker ebikes? You ebike looks capable to go faster. Yes, it was very funny to ride together. In the very rough trails that we have out there in the hills near Pisa me with my Bom...

Yesterday I had some good time with friends in the hills near Pisa. I was the only one with the tank

The first thing I noticed as I got this BMS is that it was balancing worse (maybe it pulls too little current to balance the higher cells) than my iCharger 1010B+ that balances up to 10S in a very accurate manner also if the cells are pretty old and degraded. It was with my older battery made with L...

my house is in Lucca province, in Tuscanny. lots of hills and outdoors all around me. anyone have a link to the taller seat? i have not seen that mod in all my searching. I live in province of Pisa on the seaside of Tuscany. Would be very nice if we could meet on the tracks in the hills between Pis...

csc wrote: ↑

Mar 26 2019 2:39am

Indeed. happier and happier with this setup

What about the BMS? Are you using one?

While we are a little bit off topic I guess I can ask you TV. What do you thing about this mini electric chopper? https://www.dogebos.cn/wp-content/uploads/sites/2/2017/12/21.jpg https://www.dogebos.cn/product/2018-netherlands-warehouse-sc14-electric-motorcycle/ I've been looking for this little toy...

It seems to me that given a volume is advantageous (greater Wh and greater V) use 18650 Samsung 30Q or Sony VTC6 instead of 21700 Samsung 40T

After market, why would surron make that kind of stuff =) With the help from Madin it looks like the next season for Light Bee will be very quiet! I will start offering these quite soon. Dont ask questions yet, full disclosure will be made once we fully test this kit out! So close now to finishing....

This is how you do a drop in replacement controller. Thermo Nucular controller 24F Maximum power 20 000W Nominal power 10 000W Voltage range 20-90V Phase max 500A Battery max ~300A https://endless-sphere.com/forums/viewtopic.php?f=31&t=75494 it's my impression or the mosfets were on the other side ...

I ordered the black one I linked before on Aliexpress. I measured my present bar and it raise about 35mm so I will increase only 15mm with the 50mm riser bar but for €13,29 I can try it :wink: While In there I would change the left Handlebar grip that is pretty worn out but I don't find any 100mm ty...